Congratulations on your purchase of the RCR804BFDR/RCR804BR. This userfriendly
remote makes juggling multiple remote controls a thing of the past! This
one unit controls up to four components, including the most popular brands of TVs,
VCRs or DVD players, and satellite receivers, cable boxes, or digital TV converter
boxes. The RCR804BFDR/RCR804BR is easy to use, easy to program, and it gives
you total control—at the touch of your fingertips!
Battery Installation
Your RCR804BFDR/RCR804BR universal remote requires 2 new AAA alkaline batteries
(sold separately).
To install the batteries:
1. Turn the unit over, and remove the battery compartment cover.
2. Insert the batteries, matching the batteries to the (+) and (-) marks inside
the battery case.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargable (nickel-cadmium) batteries.
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in
accordance with Local and National Regulations.
Programming with Direct Entry
To program your remote to control up to four
components, follow these steps:
1. Manually turn on the component you wish to
program the remote to operate.
2. Find the four-digit code for your brand of TV,
VCR, DVD, satellite receiver, cable box, or
digital TV converter in the enclosed code lists.
3. Press and hold the CODE SEARCH
key until the indicator light turns on.
4. Release the CODE SEARCH key.
5. Press and release the TV, VCR or
SAT·CBL·DTC key. The indicator light
blinks and then remains lit.
Note: DTC references digital TV converter.
To program the DVD·AUX key: Press the
DVD·AUX key. To control a DVD, press the
VCR key. To control a TV, press the TV key. To
control a satellite receiver, cable box, or digital
TV converter, press the SAT·CBL·DTC key.
The indicator light stops blinking and remains
lit.
6. Enter the four-digit code, using the numeric
keypad. After the code is entered, the
indicator light turns off.
Note: If the indicator light blinks multiple times, you’ve
entered an invalid code. Start from step 2 again.
7. Aim the remote at the component and
press the ON·OFF key. The component
should turn off.
Note: If your component does not respond, try all the
codes for your brands. If the codes do not work or your
brand is not listed, try the Code Search Method that
follows.