Battery Installation

Programming with Direct Entry

Universal RCA Remote TV Codes

RCR804BFDR/RCR804BR RCA universal remote Programming instructions.

Universal Remote TV Codes for RCA RCR804BFDR, RCR804BR

To use RCA universal remote with your home entertainment system, first you need to program it to control your devices. There are four ways you can program the universal remote to operate your devices. Try them in the order listed here:

• The Brand Code Search searches through the codes for select brands of devices.
• The Direct Code Entry lets you enter a code from the accompanying code list for your brand of device.
• The Auto Code Search goes automatically through all the codes for the device you're trying to control.
• The Manual Code Search lets you manually go through all the codes for the device you're trying to control

Brand Code Search

The Brand Code Search goes through only the codes for one of the select brands listed in the accompanying code list. If your brand of device is listed, this search can be very quick and easy.

TIPS:

• Each device key is associated with a type of device— the TV is preset to search for TVs, SAT•CBL•STREAM for satellite receivers, cable boxes, digital TV converters, or streaming media players and DVD•VCR for VCRs or DVD players.
• The POWER key serves as an indicator light during programming, giving you feedback at each stage of the process.
• To exit without saving a new code at any point in the Brand Code Search, press the GO BACK key.

Programming Using the Brand Code Search:

1. Manually turn on the device you want to control. If you're programming the TV or SAT•CBL•STREAM key, go to step 3. If you're programming the DVD•VCR key, you need to tell the remote which kind of device you want this key to control, VCR or DVD.
2. Press and hold the DVD•VCR key. While you're holding down the DVD•VCR key, use your other hand to press the number key for the type of device you want to control with this key: 2 for VCR, 3 for DVD.
3. Find your device’s brand in the Brand Code list section of the accompanying code list. Circle the number for your brand and keep the list handy.
4. Press and hold the device key you want to program. While you're holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time.
5. Wait until the POWER key comes on and stays on. Then release both keys.
6. Look at the number you circled for your device’s brand code number. Press that number on the remote keypad.
7. Point the remote directly at the front panel of the device you want to control. Press POWER on the remote and wait 2 seconds. The remote is testing a single code for your device’s brand. Did your device turn off? YES: Press the STOP key to store the code. You're done! You've programmed this device key. NO: Press POWER again. The remote tests the next code for your brand. Keep pressing POWER every 2 seconds until your device turns off. When it does, press STOP.

Testing the Code for Maximum Functionality:

1. Try a variety of the device’s functions with the remote. If some device features don't work, go to the next step to try a different code.
2. Repeat the Brand Code Search from the beginning. When the device turns off for the first time, don't press the STOP key, which would store the same code. Instead, with the unit now off, continue to press the POWER key repeatedly until the unit turns back on.
3. Once the unit turns back on, you have found another code that operates the device. Press the STOP key.
4. Test the key’s functionality again by attempting to control a variety of the device’s functions. If the code that has been stored controls the majority of the device’s functions, programming is complete. If the code stored does not give maximum functionality, try another code.

How to connect a universal remote to a TV :

1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.

2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.

3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press AUX then the device Button you are assigning to AUX. The INDICATOR LIGHT will blink then remain lit.

4. Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will turn off.

5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the POWER button. Your device should turn off.

Note:  If your device does not respond to the first code listed, If your TV, VCR, DVD, etc. does not respond after you have tried all the codes for your brand or if your brand is not listed, try searching for your codes by  following the steps below.

1.Turn on the device you wish to program.

2.LIGHT lights, then release. Press and hold CODE SEARCH/SETUP until the INDICATOR

3.programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device

button you are assigning to AUX. Press and release the device button for the device you are

4. 2 seconds between each time you press POWER. Important: You may have to press POWER up to 250 times.Press and release POWER until your device turns off. Wait at least

5.INDICATOR LIGHT will go off.

When your device turns off press the ENTER/SAVE button. The SLEEP FEATURE (RM94902, RM94904 and RM94905) This feature will turn off your TV at the time you choose from 1-99 minutes.

To Use the Sleep Feature:

1. Press and hold the SLEEP button until the INDICATOR LIGHT stays lit.

2. Enter time in minutes using the numerical keypad. (Minutes 1-99;press 0 before the actual number).

3. Lease remote aimed at television. The Sleep Function will not function properly unless the remote is left aimed at the television.

Turn Off the Sleep Feature: 

Press and hold SLEEP until the INDICATOR LIGHT blinks or press the

POWER button to turn off the TV.

Comcast: Use remote code 10030
AT&T (U-verse): Use remote code 1043
DirecTV: Use remote code 10030
RCA Universal remotes: Use remote code 0030
Dish Network Remote Controls: Use remote code 506Please use the above codes to program the remote control.

How to Program Avera TV Remote

1. Switch on the TV
2. Now go to the Component key on your remote which is usually located at the top of the remote.
3. Press TV.
4. Now it will ask to enter Avera TV remote codes. Enter the appropriate one from above list.
5. Now its done. Please switch off using the remote and test all functions.

Newer codes 5 digit:

11886
10178
11687
12183

Cox Universal remote codes for Element TV

1687, 1886, 2183

Verizon universal remote codes for Element TV

3264

Comcast Xfinity remote codes for Element TV

13559, 11687, 12964, 12260, 13907,

11886, 11864, 12183, and 10178

Element TV Codes for RCA 3 in 1 Universal Remote

11687, 11886, 12183, 12964, 13559

Older codes 3 digit Codes to operate your Element TV:

046, 005, 028, 043, 
048, 076, 096, 155, 
004, 051, 127, 151, 
153, 154, 231, 236, 
238, 247, 252, 168, 
121

How to Program Universal remote control for Element TV

Before you begin programming universal remote control to control the Element TV make sure to plug all device. Check the battries in the universal remote are working. with out wasting any more time lets get to working.

Programming Instructions

Using the code(s) provided above, program the remote control directly using the following steps.

1. Enter Setup Mode

   Press and hold down the SETUP button on the remote until the red light on the remote turns on. Release the SETUP button. The red light will remain on.

   NOTE: The red light with either be a small light at the top of the remote or the power on/off button.

2. Press the device type button

   Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.

   NOTE: If there is not a device button on the remote for your type of device, you can use any device button on the remote.

3. Enter the device code

   Use the number buttons on the remote to enter the codes shown above. The red light will turn off after entering the fourth digit.

4. Tests the results

   Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect. If the buttons do not operate the device, return to Step 1 above and use the next code in the list.

5. Repeat this process for your other devices

Your Element TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.

Complete list of codes for Magnavox Universal Remote Codes for TVs, DVD and audio video devices along with programming instruction to control all your devices.Magnavox Universal Remote Control Programming Codes are used to program your Magnavox remote or any universal remote to conrol your Television and audio video devices.

How to program Remote Control Codes For Magnavox TVs using most universal remote controls

Step 1:

Turn on the TV, Make sure battries are working in the remote.

Step 2:

Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.

Step 3:

 With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code,choose corresponding code from the list give below.

Step 4:

 Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.

Step 5:

Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Remote Control Codes For Magnavox TVs

view full universal remote code list for Magnavox universal remote

Magnavox TV Remote Control Codes

1053
1056
1057
1059
1060
1061
1083
1004
1007
1018
1047

Magnavox Sound Bar

32459

Magnavox DVD Remote Codes

2245
2293
2318
2320
2321
2327
2002
2018
2089
2237
2241

Magnavox HDTV Remote Codes

1372
1414
1329
1358

Magnavox VCR Remote Codes

3153
3183
3190
3206
3211
3016
3036
3051
3061
3128
3152

Complete list of codes for Magnavox Universal Remote Codes 

you can find the additional support information at Magnavox website.