Make sure to hookup and power on all the devices you want to setup. next make sure the batteries are working in the GE universal remotes. Note down the GE universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hooked up or universal remote batteries are bad after spending your evening on programming GE remote. 

GE Universal Remote Codes manual setup and Instructions

Step 1. Enter device into setup mode

Locate SETUP button on the GE universal remote control, Press and hold the setup button till you see red light is on. then stop holding the setup button. now remote is in setup mode.

Step 2. Select the device 

quickly press and release the device button you want to setup. For example if your programming TV then press TV button and release it.

Step 3. key the universal remote code coresponding to your device from below list.

Use the number keypad to enter universal remote code, Now red light will trun off.

Step 4. Verifying the results.

point GE Universal remote in the direction of the device and try to trun on and off the device. if the device responds your all set.  otherwise repeat the steps using next four digit code from below list.

Step 5. Setting up other device.

repeat the above steps to setup more devices.

4 Digit GE Universal remote codes for Cable set-top boxes.

Start with first code then work with next code, we have listed the codes based on the manufacturers most popular model of device. for each code follow above five steps. 

Ge Universal Remote Codes

Ge Universal Remote Codes