Universal Remote Codes for TCL Roku TV

TCL TVs have become increasingly popular due to their affordability and advanced features. Programming a universal remote for a TCL TV is a simple process that allows you to control your TV with ease. There are two different methods for programming a universal remote, depending on the brand and model of your remote control. By following following basic steps and using the universal remote codes listed below, you can easily program your remote to work with your TCL TV.

ATT Uverse = 1346
Bright House Cable = 1756
Cablevision = 031
Charter = 11756
Comcast = 11756
Cox = 1756
DirecTV = 11756
Dish Network = 535
ONN = 3851
RCA = 11756
Time Warner = 387 or 1566
TIVO = 0091 or 0366
Verizon = 180

Here are some additional TLC TV codes -

• 11756
• 10818
• 12434
• 12290
• 12292
• 12187
• 11265
• 10154
• 10056
• 10047

If you own a Roku TCL Smart TV and a cable or satellite remote control, you can program the remote to work with your TV. This can be a convenient way to control your TCL Smart TV without having to use the multiple remotes. The process for programming the universal remote may vary depending on the specific remote control you have, but there are general steps you can follow to get started. By doing so, you can enjoy your favorite shows and movies with greater ease and convenience.

Controlling your TCL Roku TV with a cable, satellite, or universal remote is possible in many cases. Your provider may have a table of codes that you can use to program your remote to control certain functions of your TV. Look for your provider and the code that matches your remote in below list, and follow the instructions provided to program your remote. It's important to note that these codes come from TV remote cable providers and we carefully collect from companies to provide you. Not all buttons on your TCL Roku TV remote can be programmed to the buttons on your cable or satellite remote, and the level of button support may vary for specific remotes. 

Roku TCL TV Programming instructions

The process for programming a remote control for a TCL TV may vary depending on the model of your remote control. However, here are some general steps that you can follow:

1. Turn on your TCL TV.
2. Press and hold the "Setup" button on your remote until the button blinks twice.
3. Enter the four-digit code for TCL TVs. You can find a list of codes above.
4. Press the "Power" button on the remote. If the TV turns off, the programming is successful.
5. If the TV does not turn off, repeat steps 2-4 with another code until you find the correct one

If none of the codes work, you can try the auto-code search method:

1. Turn on your TCL TV.
2. Press and hold the "Setup" button on your remote until the button blinks twice.
3. Press the "TV" button on your remote.
4. Press and hold the "Setup" button again until the TV button blinks twice.
5. Press the "Power" button on the remote and then press "CH+" repeatedly until the TV turns off.
6. Press the "Setup" button again to save the code.

Union TV 3 Digit Remote Control Codes
055
060
065
067
013
054
089

ON MOST REMOTES (Generalized):
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Upstar TV Universal Remote Control Codes

0037
0056
0442
0001
0370
1178
0002
0009
0702
0774
0093
0217
0448
0747
0482
0370
0264
0329
0090
0032
0216
0290
0154
0150
0092
0072
0179
0208
0519

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your Upstar TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc…

The following 5 digit codes will work with your Westinghouse TV

10178
10463
10885
10060
10889
11712
11661
10463
11928*
10890
11282
11577
11100
10080
10000
10111
11548
10623
10000*

Codes listed with an asterisk (*) are possible alternate codes for your TV. These alternate codes should operate the primary functions of your device in most cases (Power, Volume Up and Down, Mute).

How to get remote codes to work on Westinghouse TVs

Step 1

Turn ON Westinghouse  TV

Step 2

Press and hold MUTE & SELECT for two blinks

Step 3

Enter 9 9 1, wait two blinks

Step 4

Enter 1

Step 5

Press and release VOL UP

Step  6

Point the remote at the TV and keep pressing and releasing the CH UP key, if and when the volume changes

Step 7

Press select to lock in code

Some remotes may require you to first switch to TV mode by first pressing the TV key to switch modes. You can then use the POWER or VOLUME keys to see if the television already works with the remote.

Many remote controls will search sequentially for a compatible set of commands. This is the simplest way to program a remote to operate with Westinghouse models. See the particular device instructions for an appropriate sequence of keystrokes.

Basic Remote Control Setup Instructions

Step 1

Set the “Mode” to TV.

Step 2

Press and hold the “Mute” button and the “Select” button until the visible LED blinks twice.

Step 3

Enter the 5 digit Code above. 

XENON TV Universal remote control codes - 3 Digit, 4 Digit and 5 digit codes

Use below xenon tv codes to program universal remote control to operate xenon tv.

039
036
0381
0389
00183
00264

Universal remote programming instruction for Xenon TV

Make sure to hookup and power on all the xenon tv or othr device you want to setup using xenon universal remote codes. next, make sure the battries are working in sceptre universal remote. Note down the xenon universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hookedup or universal remote battries are bad after spending your evening on trying to program xenon universal remote. 

Step 1

Turn on the TV.

Step 2

Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.

Step 3

With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.

Step 4

Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.

Step 5

Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your XENON TV can be controlled with a universal remote and work with Comcast,  Dish Network,  Direct TV,  RCA, etc… remotes.

Goldstar TV Remote Codes:
0003
0004
0043
0080
0153
0172
0252
0269
0270
0280
0299
0333
0393
0395
0399
0400
0476
0477
0481
0482
0486
0498
0501
0513
0518
0528
0544
0579
0581
0590
0592
0599
0600
0624
0641
0663
0673
0677
0678
0694
0697
0752
0794
0409
0410
0414

Grundig 3 Digit TV Remote Codes
113
110
128

Grundig 4 Digit TV Remote Codes
0195
0160
0161
0171
0310
0320
1144
1124
1131

Grundig multi-brand remote codes for TV’s.
1 – Turn on TV.
2 – Press and hold the TV key and enter the codes for your brand.
3 – If your TV turned off then you entered the right code and setup is complete.
(If not repeat with a different code.)

JENSEN codes 3 digit:
004
009

Newer JENSEN codes 4 digit:
0004
0009
0133

Depending on the remote control you have, the method to search for the code will vary, below is an example that may work with most remotes.

Search For Your JENSEN TV Remote Code…
If you have tried the codes for your TV and you are still not able to get the TV to work, try the following procedure to search for your code.

– PRESS the button for the TV then RELEASE.
– PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
– ENTER 9-9-1 (two blinks on the remote)

– ALTERNATE slowly between the POWER key and the DEVICE TV button until your device turns off.
– Make sure that the remote is pointed at your device during the search.
– You may have to press this sequences of buttons multiple times to search the entire library of codes.
– When your TV turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your TV.

Your JENSEN TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.