Comcast: Use remote code 10030
AT&T (U-verse): Use remote code 1043
DirecTV: Use remote code 10030
RCA Universal remotes: Use remote code 0030
Dish Network Remote Controls: Use remote code 506Please use the above codes to program the remote control.

How to Program Avera TV Remote

1. Switch on the TV
2. Now go to the Component key on your remote which is usually located at the top of the remote.
3. Press TV.
4. Now it will ask to enter Avera TV remote codes. Enter the appropriate one from above list.
5. Now its done. Please switch off using the remote and test all functions.

Daewoo TV 4 Digit Remote Control Codes:
0905
0615
0505
0826
0529
0046
0614
0002
0502
0611
0102
0415

Daewoo TV 3 Digit Remote Control Codes:
039
016
092
091
004
005
006
016
017
018
127
171
102
110
214
303
311
314
403
407
415
502

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3 or 4 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3 or 4 digit code. The button will blink twice to confirm the code is stored.

Your Daewoo TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.

Make sure to hookup and power on all the dynex tv or othr device you want to setup using dynex universal remote codes. next, make sure the battries are working in sceptre universal remote. Note down the dynex universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hookedup or universal remote battries are bad after spending your evening on trying to program dynex universal remote. 

how to program dynex TV with Universal remote control

Use the following directions to program your DYNEX TV (including LCD, LED and Plasma) device

Step 1

Turn on the TV.

Step 2

Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.

Step 3

With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.

Step 4

Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.

Step 5

Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Dynex tv codes for universal remotes using 5 digit remote codes

10463 11463, 11780, 11785

Dynex tv codes for universal remotes using 4 digit remote codes

0490, 0463, 0783, 1944, 1250, 0464

Also try these 5 digit remote codes for DYNEX TVs:

10180
10178
10171
10623
11963
10096
10463
10154
10236
10463

Try these 4 digit codes to use with your DYNEX TV

0177
0185
0282
0039
0280
0038
0154
0236
0463
0180
0178
0179
0019
0623

VIZIO Universal Remote Setup codes for DYNEX TV (including LCD, LED and Plasma)

Newer codes 5 digit:

11886
10178
11687
12183

Cox Universal remote codes for Element TV

1687, 1886, 2183

Verizon universal remote codes for Element TV

3264

Comcast Xfinity remote codes for Element TV

13559, 11687, 12964, 12260, 13907,

11886, 11864, 12183, and 10178

Element TV Codes for RCA 3 in 1 Universal Remote

11687, 11886, 12183, 12964, 13559

Older codes 3 digit Codes to operate your Element TV:

046, 005, 028, 043, 
048, 076, 096, 155, 
004, 051, 127, 151, 
153, 154, 231, 236, 
238, 247, 252, 168, 
121

How to Program Universal remote control for Element TV

Before you begin programming universal remote control to control the Element TV make sure to plug all device. Check the battries in the universal remote are working. with out wasting any more time lets get to working.

Programming Instructions

Using the code(s) provided above, program the remote control directly using the following steps.

1. Enter Setup Mode

   Press and hold down the SETUP button on the remote until the red light on the remote turns on. Release the SETUP button. The red light will remain on.

   NOTE: The red light with either be a small light at the top of the remote or the power on/off button.

2. Press the device type button

   Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.

   NOTE: If there is not a device button on the remote for your type of device, you can use any device button on the remote.

3. Enter the device code

   Use the number buttons on the remote to enter the codes shown above. The red light will turn off after entering the fourth digit.

4. Tests the results

   Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect. If the buttons do not operate the device, return to Step 1 above and use the next code in the list.

5. Repeat this process for your other devices

Your Element TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.

ILO TV Remote Codes:
0171
0179
0180
0463
1000
1004
1030
1035
1054
1090
1133
1168

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your ILO TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc…

Kogan TV Universal Remote Codes

7890
0418
0641
0714
0726
0754
0779
0816
1190
2267
1404
0037
0587
0371
0218

What to do when Kogan TV Remote does not respond

Make sure that the batteries in your remote are properly inserted and have sufficient charge. Try replacing the batteries with fresh ones to see if that resolves the issue.

Check the remote for any debris or dirt that may be blocking the buttons. Clean the remote with a soft, dry cloth to remove any debris.

Sometimes, resetting the remote can fix any issues you may be experiencing. To do this, remove the batteries from the remote and press and hold any button for 15 seconds. Then, replace the batteries and try using the remote again.

If your Kogan TV has a Bluetooth remote, try re-pairing it with the TV. To do this, go to the TV settings and navigate to the Bluetooth settings. Select the remote and follow the on-screen instructions to re-pair it.

Troubleshooting Kogan TV

Check your TV is properly plugged into the power source and that the outlet is working. You can also try plugging in another device to ensure that the outlet is working correctly.

verify all the cables are securely connected to the TV and any other devices you may have connected to it, such as a cable box or gaming console.Make sure that your TV settings are properly configured. Check the picture and sound settings to make sure that they are set up correctly.

If none of the above steps work, try performing a factory reset of your TV. This will restore your TV to its original settings, which may resolve any issues you are experiencing.

 Digit Remote Codes for Matrix TVs:
020
021
025
028

4 Digit Remote Codes for Matrix TVs:
0000
0001
0031

Matrix multi-brand remote codes for TV’s.
1 – Turn on TV.
2 – Press and hold the TV key and enter the codes for your brand.
3 – If your TV turned off then you entered the right code and setup is complete.
(If not repeat with a different code.)

Proscan HDTV Codes = 1000

Proscan TV Codes = 1000, 1008, 1068, 1094, 1108

Proscan DVD Codes = 2118, 2144, 2205, 2319

Proscan VCR Codes = 3000

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your ProscanTV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc…