Hyundai TV Universal Remote Control Codes (3 and 4 digit codes):
991
0556
0706
0753
0037
0803
0865
0860
0698
1376

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your Hyundai TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc

JENSEN codes 3 digit:
004
009

Newer JENSEN codes 4 digit:
0004
0009
0133

Depending on the remote control you have, the method to search for the code will vary, below is an example that may work with most remotes.

Search For Your JENSEN TV Remote Code…
If you have tried the codes for your TV and you are still not able to get the TV to work, try the following procedure to search for your code.

– PRESS the button for the TV then RELEASE.
– PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
– ENTER 9-9-1 (two blinks on the remote)

– ALTERNATE slowly between the POWER key and the DEVICE TV button until your device turns off.
– Make sure that the remote is pointed at your device during the search.
– You may have to press this sequences of buttons multiple times to search the entire library of codes.
– When your TV turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your TV.

Your JENSEN TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.

JVC 3 Digit HDTV Remote Codes
065
067
089
013
054
055
060

JVC 4 Digit HDTV Remote Codes
1227
1130
1131

JVC 4 Digit TV Remote Codes
1080
1092
1117
1131
1235
1288
1299
1011
1012
1026
1049
1052
1054
1055

JVC 4 Digit DVD Remote Codes
2097
2115
2166
2204
2206
2017
2028
2047
2090
2096
2217

JVC 4 Digit VCR Remote Codes
3060
3067
3118
3121
3122
3123
3005
3006
3007
3014
3055

oCosmo TV Remote Codes:
10000
11360
10878
11599
10889

Remote codes for OLEVIA TVs:
1610
11610
12272
11240
11331
11144
11858

OLEVIA multi-brand remote codes for TV’s.
1 – Turn on TV.
2 – Press and hold the TV key and enter the codes for your brand.
3 – If your TV turned off then you entered the right code and setup is complete.
(If not repeat with a different code.)

The codes for a universal remote to work with a Sansui television are:
Sansui television remote code 834
Sansui television remote code 0310
Sansui television remote code 0394
Sansui television remote code 20695

These codes are compatible with Universal remotes and Sansui televisions that have a functioning infrared device.

How to use a dish network remote control to use a Sansui TV:
1-Point the dish remote at the tv.
2-Press and hold the tv button at the top till all 4 lights lite up.
3-Press the red power button at the top once.
4-Press the channel up button slowly till the tv turns off.
5-Press the pound button once.
6-Go back to the top and press the big red power button 3 to 5 times.

Senzu TV Remote Codes (3 Digit Codes):
201
205
000
297
257

Senzu TV Remote Codes (5 Digit Codes):
12493

Program your universal remote control to a Yamaha Sound Bar. Use the following 5 digit remote codes.

Yamaha Sound Bar 5 Digit Remote Control Codes:
31947
31331
30176
31176
30354
10030
10797
10017
10019

All codes reported working with these Yamaha Sound Bar Models: ATS-1030, YSP-1000, YSP-5100, YSP-4100, YSP-1400, YAS-101, YAS-103, YHT-S400, and YSP-4000BL.

These codes have been tested with the…. Comcast remote controls, Xfinity XR5, DVR 3 device remote, XR2 Remote, Xfinity XR2 U2, XR2 R2, DirecTV, Directv HR24 STB, S10-S4, U-verse remote control, RC65, Satellite H20 Receiver, DirecTV Plus HD DVR, Comcast 3-in-1 remote, and 1067BG3.

If using Xfinity try these programming methods:
-Hold Setup (2 button flashes)
-994
-Setup
-00169
-Vol Up (2 button flashes)
(Programs the volume down button to toggle TVOL on the Yamaha sound bar)

OR

-Hold Setup (2 button flashes)
-11144 (2 button flashes)
(Accepted by the Xfinity remote and programs the volume down button to toggle TVOL on the Yamaha sound bar, Should let you turn TVOL ON and OFF)

Help with Xfinity XR2 Remote here.

If using U-verse or DirecTV (ATT) try these programming methods:
-ATT/OK-955-AUX-ENTER
-ATT/OK-977-AUX-TV-ATT-ENTER

OR

Use code 30176 or 31331 for the Yamaha Sound bar
(There has to be a TV code programmed to the TV device or the volume keys will not work)
Then try this:
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 30176
Then…
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 993
-Press SELECT
Then…
-AV1 or AV2
-Press and hold MUTE & SELECT, wait for two blinks and release
-Enter 963
-Press Ch Down
Then teach the Yamaha Sound bar the commands from the DirecTV ATT remote control.

OR

Use code 30176 or 31331 for the Yamaha Sound bar
(There has to be a TV code programmed to the TV device or the volume keys will not work)
-AV1 or AV2
-Press and hold MUTE & SELECT for 2 blinks
-Enter 993
-Press SELECT