Sceptre TV can be controled using the Universal remote control, program a sceptre remote control using any universal supporting 5 digit remote codes and 4 digit codes. 

Make sure to hookup and power on all the sceptre tv or othr device you want to setup using sceptre universal remote codes. next, make sure the battries are working in sceptre universal remote. Note down the sceptre universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hookedup or universal remote battries are bad after spending your evening on trying to program sony universal remote. 

Universal remote 5 digit codes will work with your Sceptre TV

10878
11217
11360
11599
10000*

Universal remote 4 digit codes will work with your Sceptre TV

0991
0000
0080

NOTE: If you have the rc64 remote, try codes 10878, 11217, 11360, and 11599.

Codes listed with an asterisk (*) are possible alternate codes for your TV. These alternate codes should operate the primary functions of your device in most cases (Power, Volume Up and Down, Mute).

how to program a sceptre tv remote codes Instructions

Below are the steps to to program sceptre tv using universal remote codes, follow below steps on how to program a sceptre remote control.

Step 1:

Set the “Mode Switch” to TV.

Step 2:

Press and hold the “Mute” button and the “Select” button until the visible LED blinks twice.

Step 3:

Enter the 5 digit Code

Step 4:

The following code are the most popular for your Sceptre brand TV = 11360 11217 10878 11599 10000.

DIRECTV = 10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Comcast = 11864, 10178, 0060
Cox Communications = 0178
Atlas DVR Device URC = 0178
Time Warner Cable = 0178
Philips = 0002
Bell Remotes & Dish Network = 505, 506, 516, 523, 526, 566, 573, 612, 627, 647
ATT U-verse = 1004
Hitachi = 0002
URC = 2964, 0145
Cablevision customer (optimum) = 004
Bose or universal remotes = LG remote code
Universal Remote = One For All OARC04G 4 Device Universal Remote (Element code)

Skyworth TV 3 Digit Remote Control Codes
531
753
817

Skyworth TV 4 Digit Remote Control Codes
0696
0698
0727
0748
0753
0817
0037
0556
0009
0264

Skyworth TV 5 Digit Remote Control Codes
00753
00817
00037
00556
00009
00264

Symphonic TV 3 Digit Remote Control Codes
198
003
053
155
189

Symphonic TV 4 Digit Remote Control Codes
1280
1384
1483
1484
1024
1031
1036
1105

Symphonic DVD 4 Digit Remote Control Code
2321

Symphonic VCR 4 Digit Remote Control Code
3021
3002

Universal Remote Codes for TCL Roku TV

TCL TVs have become increasingly popular due to their affordability and advanced features. Programming a universal remote for a TCL TV is a simple process that allows you to control your TV with ease. There are two different methods for programming a universal remote, depending on the brand and model of your remote control. By following following basic steps and using the universal remote codes listed below, you can easily program your remote to work with your TCL TV.

ATT Uverse = 1346
Bright House Cable = 1756
Cablevision = 031
Charter = 11756
Comcast = 11756
Cox = 1756
DirecTV = 11756
Dish Network = 535
ONN = 3851
RCA = 11756
Time Warner = 387 or 1566
TIVO = 0091 or 0366
Verizon = 180

Here are some additional TLC TV codes -

• 11756
• 10818
• 12434
• 12290
• 12292
• 12187
• 11265
• 10154
• 10056
• 10047

If you own a Roku TCL Smart TV and a cable or satellite remote control, you can program the remote to work with your TV. This can be a convenient way to control your TCL Smart TV without having to use the multiple remotes. The process for programming the universal remote may vary depending on the specific remote control you have, but there are general steps you can follow to get started. By doing so, you can enjoy your favorite shows and movies with greater ease and convenience.

Controlling your TCL Roku TV with a cable, satellite, or universal remote is possible in many cases. Your provider may have a table of codes that you can use to program your remote to control certain functions of your TV. Look for your provider and the code that matches your remote in below list, and follow the instructions provided to program your remote. It's important to note that these codes come from TV remote cable providers and we carefully collect from companies to provide you. Not all buttons on your TCL Roku TV remote can be programmed to the buttons on your cable or satellite remote, and the level of button support may vary for specific remotes. 

Roku TCL TV Programming instructions

The process for programming a remote control for a TCL TV may vary depending on the model of your remote control. However, here are some general steps that you can follow:

1. Turn on your TCL TV.
2. Press and hold the "Setup" button on your remote until the button blinks twice.
3. Enter the four-digit code for TCL TVs. You can find a list of codes above.
4. Press the "Power" button on the remote. If the TV turns off, the programming is successful.
5. If the TV does not turn off, repeat steps 2-4 with another code until you find the correct one

If none of the codes work, you can try the auto-code search method:

1. Turn on your TCL TV.
2. Press and hold the "Setup" button on your remote until the button blinks twice.
3. Press the "TV" button on your remote.
4. Press and hold the "Setup" button again until the TV button blinks twice.
5. Press the "Power" button on the remote and then press "CH+" repeatedly until the TV turns off.
6. Press the "Setup" button again to save the code.

Union TV 3 Digit Remote Control Codes
055
060
065
067
013
054
089

ON MOST REMOTES (Generalized):
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

If you have a universal remote, try using the remote code 2558 to control your WD TV media player. If that does not work you may need a higher quality universal remote to actually map out some keys. See below…

These universal remote controls are compatible out of the box with the Western Digital HD Media Player.

You must use the setup code 2558 for video accessories.
One For All Essence 2 URC7120
One For All Essence 3 URC7130
One For All Essence 4 URC7140

These universal remote controls are compatible out of the box with the Western Digital HD Media Player.

These remotes will work after the phone upgrade or online download of the setup code 2558 for video accessories.
One For All Kameleon 5 URC-8305
One For All kameleon 8 URC-8308
One For All XSight Colour URC8602
One For All Kameleon 6 URC-8206
One For All Kameleon 10 URC-8210

You may need to map some keys on the remote to get all buttons correct with the “One For All” type or brand of remote controls.

Here is how to map a function to a key for the “One For All” remote

1 – Put the remote in the correct mode (SAT)
2 – Hold the “magic” button until the LED flashes 2 times
3 – Press 9-9-4
4 – Press “magic” again and do not hold it down
5 – Enter the 5 digit Key Magic code
6 – Press the key you want to map the function to

To reset a key to its default function for the “One For All” remote

1 – Hold the “magic” button until the LED flashes 2 times
2 – Press 9-9-4
3 – Press the key twice

Magic Key Codes for ONE FOR ALL remotes

00121 0
00245 1
00249 2
00310 3
00244 4
00248 5
00230 6
00232 7
00228 8
00234 9
00040 Mute
00052 Subtitles
00053 Display
00056 Audio
00116 Green
00118 Yellow
00120 Red
00122 Blue
00182 Home
00247 Options
00251 Back

One For All URC-7120 for WD TV Key Codes

00629 Eject
00565 Enter
00372 Green
00438 Home
00437 Menu Down
00698 Menu Left
00313 Menu Right
00440 Menu Up
00296 Mute
00443 Next Page
00565 OK
00503 Option
00503 Options
00311 Pause
00311 Pause/Play
00311 Play
00311 Play/Pause
00375 Power
00548 Previous Page
00632 Red
00314 Search
00246 Search Forward
00506 Search Reverse
00425 Setup
00697 Skip Forward
00695 Skip Reverse
00692 Stop
00308 Subtitle
00630 Yellow
00377 0
00245 1
00505 2
00566 3
00500 4
00248 5
00486 6
00488 7
00228 8
00234 9
00372 A
00568 Audio
00632 B
00251 Back
00378 Blue
00630 C
00378 D

XENON TV Universal remote control codes - 3 Digit, 4 Digit and 5 digit codes

Use below xenon tv codes to program universal remote control to operate xenon tv.

039
036
0381
0389
00183
00264

Universal remote programming instruction for Xenon TV

Make sure to hookup and power on all the xenon tv or othr device you want to setup using xenon universal remote codes. next, make sure the battries are working in sceptre universal remote. Note down the xenon universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hookedup or universal remote battries are bad after spending your evening on trying to program xenon universal remote. 

Step 1

Turn on the TV.

Step 2

Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.

Step 3

With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.

Step 4

Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.

Step 5

Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your XENON TV can be controlled with a universal remote and work with Comcast,  Dish Network,  Direct TV,  RCA, etc… remotes.