1. Turn on a device.
2. On the remote control, press a device key once (e.g., AUX, VCR, or CABLE). Press and hold SETUP until the selected mode key flashes twice, then release SETUP.
3. ENTER the four digit code for your device found in the sidebar to the right. If performed correctly, the selected mode key will blink twice. If the selected mode key emits a long blink, the code is invalid. Repeat steps 2 through 3 and try entering the same code again.
4. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code.
5. Repeat steps 1-4 for each device you want the remote control to control. For future reference, write down each working device code.

Programming the remote:
1. Move slide switch to the position for the desired type of device.
2. While pressing the POWER button.
use the number buttons to enter the three digit code from the list below
3. Release the POWER button and test.
4. If the code does not operate the product, repeat using the next code listed.

MITSUBISHI TV Codes:
Net Command TM – 935
All other Models – 000

AUDIO RECEIVERS Codes:
MITSUBISHI – 010,011,012,013,014
DENON – 234,235,236,245,246,359
JVC – 232,233
KENWOOD – 200,208
ONKYO – 209,214,247
PANASONIC – 218,219,221
PIONEER – 205,207
SONY – 222
TECHNICS – 218,219,221
YAMAHA – 201,202,243,244

CABLE BOXES Codes:
GENERAL INS./JERROLD/MOTOROLA – 111,119,120,121,122,123,124,125,126,127
OAK – 102,137,139
PIONEER – 101,116
SCIENTIFIC ATLANTA – 111,112,113
Zenith – 100,117

DBS/SATELLITE/HDTV Codes:
MITSUBISHI-DBS/DTV – 006
Promise Module HDTV – 195
DISHNETWORK – 175
HUGHES-DBS – 173
PANASONIC-DBS – 174
RCA-DBS – 176
SONY-DBS – 177

DVD/LDP Codes:
MITSUBISHI(DVD) – 003
MITSUBISHI(LDP) – 016,017
PANASONIC – 250
PIONEER(DVD) – 252
PIONEER(LDP) – 016,017
SONY – 254,278,279
TOSHIBA – 253

VCR Codes:
MITSUBISHI – 001,002
HITACHI – 020,043,065
JVC – 030,054,059
MAGNAVOX – 043,044,051
PHILIPS – 043,044,051
PANASONIC – 041,042,043
SONY – 048,049,050
TOSHIBA – 021,066

vizio universal remote codes are listed below, before programming vizio tv using universal remote codes Make sure to hookup and power on Vizio tv and all the devices you want to setup. next, make sure battries are working in the Vizio or universal remotes. Write down the Vizio universal remote codes from the list provided below. Nothing is more frustrating to find out that you have not hookedup or universal remote batteries are bad after spending your evening on programming universal or Vizio remote. 

This article is about Programming Vizio TV using Universal remote or a replacement remote, if you are looking for "how to program Vizio Remote universal remote for tv" see our article on Using Vizio remote to operate devices in your entertainment system here 

How to program VIZIO Tv using a Universal Remote control code

Use the following instructions and code list to program your VIZIO Universal Remote Control

Step 1

Manually turn on your TV (or device you want to control)

Step 2

Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

Step 3

Enter the programming code for your VIZIO TV from the code list  below and enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off.

Step 4

Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete.

Step 5

If not, repeat steps with a different code.

Vizio 2 digit, 3 digit, 4 digit and 5 Digit Universal Remote   Control Codes For VIZIO TV

vizio Universal remote codes  2 Digit for Vizio TVs

19

vizio remote codes 3 Digit for programming  Vizio TVs

502
627
004
113
505
011

vizio remote codes 4 Digit Remote Codes for Vizio TVs

1758
0178
1756
0128
0117
1017
1078
0030
0056
0205
1292
1004

vizio remote codes  5 Digit programming Codes for Vizio TVs

10178
10117
11756
11758
01377
10885
10864
10120

Vizio remote codes to Program vizio tv with verizon Fios Universal Remote

0891, 0912, 1292, 1783, 3145

 Vizio remote codes for Philips RC, Motorola, and Scientific-Atlanta AllTouch remote controls

0891, 0912, 1292, 1783, 3145

How to Program a Vizio Remote Control

Program the Vizio Remote Control For Cable TV

1. Power on the cable TV set-top box.

2. Press the "CBL" button on the Vizio remote control.

3. Push and hold down the "SET" button until the LED indicator light flashes twice.

4. Enter the remote programming code for your cable TV box with the Vizio remote's numeric keys. Wait for the LED indicator to flash twice after you enter the last number.

5. Point the remote control at your cable TV box and then press the "POWER" button to switch off the cable box.

Program the Vizio Remote Control For a DVD Player or Recorder

1. Power on the DVD device.

2. Press the "DVD" button on the Vizio remote control.

3. Push and hold down the "SET" button until the LED light flashes twice.

4. Enter the code for your DVD. Wait for the LED indicator to flash twice.

5. Point the remote control at your DVD device and press the "POWER" button to switch it off.

Program the Vizio Remote Control For a VCR

1. Switch on the VCR.

2. Press the Vizio remote button that you want to use for the VCR; for example, you might want to select the "Audio" button if you don't have a home audio system.

3. Press and hold the "SET" button until the LED light flashes twice.

4. Enter the remote code for your VCR. Wait for the LED indicator to flash twice.

5. Aim the Vizio remote control at the VCR and press "POWER" to switch off the device.

SONY 3 & 4 digit universal codes are:
002, 000, 011, 080, 111, 006, 071, 128, 1904, 925
0000, 0834, 0810, 1685, 1786, 1032, 1972

 Zenith Universal Remotes Codes for all devices: 101, 142, 149, 177, 201, 224, 225, 229,
237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521 

More Codes

Universal Remote Control Codes For Sanyo TVs

Goto :  Sanyo DVD , Sanyo Sound Bar , Sanyo Blu-Ray 

The universal code for most is 049 for a Sanyo TV.

1. With your universal remote you press the code search key until it illuminates and then you press and release the TV key.

2. Next enter the three digit code (3 digit remote code page) and the indicator light turns off. 

3. If you enter in the wrong code the light will flash rapidly.

4. Aim the remote at your tv and press the on/off key.

5. If your tv turns off then you have found the right code!

Sanyo TV Remote Codes

use these codes for your Sanyo TV : 054, 069, 023, 025.

If those do not work then also try: 004, 013, 049, 108, 110, 180, 209

Codes for Sanyo TV using Sony Remote 

• 330,335

Codes for Sanyo TV using Comcast xfinity remote

• 10154, 10159

Codes for Sanyo TV using Cox remote

• 0054, 0154, 0088, 0799, 1142

Codes for SANYO TV using one for all remote

• 0049 0097 0110 0004 0268 0012 0108 0180

Codes for SANYO TV using one for  using DirecTV remote - 

• 10154, 10088, 10107, 10146,
•   10159, 10232, 10484, 10799,
•   10893, 11142, 10208, 10339

Sanyo Soundbar Remote Control Codes

The Samsung universal remote is often an underappreciated invention despite its immense utility. When the original remote is lost or a replacement is unavailable, Samsung universal remotes works with various brands can step in to save the day. These remotes are easily pairable and can be set up to work with nearly any television, regardless of brand or model.

This guide will focus on Samsung TV remote codes and programming a Samsung universal remote and the necessary remote codes for syncing with your device. Continue reading to learn everything about setting up your Samsnung TV with universal remote.

Samsung TV Remote Code

• 0019, 0618, 0644 , 0056
• 0060, 0587 , 0037, 0178
• 0030, 0556, 0009, 0702
• 0774, 0093, 0217, 0448

Tips for setting up Samsung TV Remote Codes

There are several reasons why the codes may not work initially. However, this is completely normal and is precisely why multiple codes are provided. If the first code doesn't work, you can simply try another one. Keep in mind that this may take a few minutes, and you may need to repeat the steps.

Another factor that can affect the performance of your remote is the condition of the batteries. Deteriorating batteries can cause the remote to malfunction and prevent it from responding to commands. Be sure to use new batteries for optimal performance.

Lastly, it's possible that objects in the room may be blocking your TV and preventing it from detecting any commands from the remote. Ensure that there are no obstructions in front of your device to avoid this issue.

Detailed Instructions to use Samsung Remote Codes for your TV, DVD, blu ray player. use the samsung tv codes listed to control tv with any universal remote.

Goto Remote Codes Section 

3, 4 & 5 Digit Universal Remote Control Codes For Samsung TVs

Here’s the first method that you can follow to pair the Universal remote to your Samsung TV or any other device with the help of the remote code.

How to program Samsung TV using universal remote codes:

1. Make sure that the DTA is powered on and properly installed.

2. Be sure your remote is able to see the front of the Adapter during setup.

3. Using your Adapter’s remote, press and hold the PROG button until the LED on the remote turns on, then press the INFO button.

4. The LED on the remote will blink slowly to show that it is now in pairing mode.

5. Enter the 3-digit number that appears on your TV screen with the keys on your remote.

6. If the numbers are entered correctly, then your TV will show Success.

7. If the numbers are not entered correctly, your TV will show Sorry, the entry was incorrect.

8. You can try again by entering the displayed code.

Here’s the Second method you can follow to pair the universal remote to your Samsnug TV without the requirement of entering or inputting any code.

Samsung TV and Universal Remote code programming with out code:

1. Press and hold “PROG” button for few seconds.

2. You will see a red solid light.

3. Release “PROG” button and then press “TV” key one time, do not keep pressed.

4. Enter the TV code for Samsung : 0101, and keep trying with Samsung 4 digit and 5 digit remote code list below

5. The LED light will go off after the correct code is entered.

Samsung 4 digit remote control codes:

• 0019, 0618, 0644 , 0056
• 0060, 0587 , 0037, 0178
• 0030, 0556, 0009, 0702
• 0774, 0093, 0217, 0448
• 0747, 0482, 0370
• 0264, 0329, 0090, 0032
• 0216, 0290, 0154, 0150
• 0092, 0072, 0179, 0208
• 0519, 0156, 0163, 0625
• 0226, 0812, 0817, 0821, 1060

Remore Codes Samsung TV using Philips Remote:

• 0112, 0309, 0209, 0512
• 0302, 0502, 0002, 0102
• 0110, 0818, 0895, 0437
• 0802, 0103, 0609, 0012, 0212

Remore Codes Samsung TV using One-For-All Universal Remote:

• 0587, 0178, 0093, 0060, 0030, 0019, 0056

Remore Codes Samsung TV using  GE Universal Remote

• 0105, 007, 70076, 0109
• 0007, 0009, 0004, 0005
• 0085, 0172, 0942, 0358
• 0012, 0015, 0080, 0104, 0106

Remore Codes Samsung TV using  RCA Universal Remote

Samsung TV 4 digit codes:

• 1004, 1009, 1012, 1013,
• 1014, 1015, 1025, 1046,
• 1056,1065, 1069, 1078,
• 1083, 1102, 1103, 1104,
• 1123, 1124, 1194, 1205, 1207

Samsung TV 5 digit codes:

• 10812, 10054, 10060, 10702
• 10178, 10030, 10056, 10650
• 10766, 10814, 11060

Remore Codes Samsung TV using  Innovage Jumbo Remote Samsung codes:

• 004, 005, 009, 015, 104, 105,106, 109, 172

Remore Codes Samsung TV using  Samsung IR Codes

• 0051, 0161, 0181, 0261, 0301, 1181, 1561,
• 1661, 2141, 2391, 2401, 2551, 2791, 3211,
• 3601, 3661, 3711, 3721, 3741, 3751, 3761,
• 3771, 3781, 3791, 3811, 3821, 3831, 3861,
• 3881, 3911, 3921, 4091, 4101, 4111, 4121,
• 4831, 4841, 5191, 5201

(3211 work for Plasma and Led TV)

Make sure to hookup and power on all the Sony TV or other device you want to setup using Sony universal remote codes. next, make sure the batteries are working in the universal remote. Note down the Sony universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hooked up or universal remote batteries are bad after spending your evening on trying to program Sony universal remote.

Sony Programming Instructions

Follow these steps to program the remote control.

Step 1

Turn on the component to be programmed.

Step 2

On the remote control, press and hold the SET button until the SET indicator lights up.

Step 3

Press the appropriate component select button for the component being set up.

Step 4

Using the number pad, enter the component's manufacturer code. Note: If more than one code number is listed for the manufacturer, repeat the procedure, entering one code at a time until you find one that works.

Step 5

Press the ENTER button.Point the remote control at the component and press the POWER button.

SONY 3 & 4 digit universal codes are

002, 000, 011, 080, 111, 006, 071, 128, 1904, 925
0000, 0834, 0810, 1685, 1786, 1032, 1972

VCR Codes

Sony – 301,302,303

Admiral (M. Ward) – 327
Aiwa – 338,344
Audio Dynamic – 314,337
Broksonic – 319,317
Canon – 309,308
Citizen – 332
Craig – 302,332
Criterion – 315
Curtis Mathis – 304,338,309
Daewoo – 341,312,309

DBX – 314,336,337
Dimensia – 304
Emerson – 319,320,316,317,318,341
Fisher – 330,335
Funai – 338
General Electric 329,304,309
Go Video – 322,339,340
Goldstar – 332
Hitachi – 306,304,305,338
Memorex – 309,335
Minolta – 305,304
Mitsubishi / MGA – 323,324,325,326
Multitech – 325,338,321
NEC – 314,336,337
Optimus – 327
Panasonic – 308,309,306,307
Pentax – 305,304
Philco – 308,309
Philips – 308,309,310
Pioneer – 308
Quasar – 308,309,306
RCA / Proscan – 304,305,308,309,311,312,313,310,329

Realistic – 309,330,328,335,324,338
Sansui – 314
Samsung – 322,313,321
Sanyo – 330,335
Scott – 312,313,321,335,323,324,325,326
Sharp – 327,328
Sylvania – 308,309,338,310
Symphonic – 338
Tashiro – 332
Tatung – 314,336,337
Teac – 314,336,338,337
Technics – 309,308
Toshiba – 312,311
Wards – 327,328,335,331,332
Yamaha – 314,330,336,337
Zenith – 331

Disc Player Code Numbers:
Sony – 701
Panasonic – 704,710
Pioneer – 702

DVD Code Numbers:
sony dvd remote codes – 751
Panasonic – 753
Pioneer – 752
RCA – 755
Toshiba – 754

Cable Box Code Numbers:
Hamlin/Regal – 222,223,224,225,226
Jerrold/G.I. – 201,202,203,204,205,206,207,208,218
Oak – 227,228,229
Panasonic – 219,220,221
Pioneer – 219,220,221,214,215
Scientific Atlanta – 209,210,211
Tocom – 216,217

Zenith – 212,213

DBS Receiver Code Numbers:
Sony – 801 (Preset code for remote control)
General Electric – 802
Hitachi – 805
Hughes – 804
Panasonic – 803
RCA / Proscan – 802,808
Toshiba – 806,807

Download the Manual

Universal Remote (Replacement for RM-V202) Codes for Model # RM-V210