Universal Remote Control Codes For Sanyo TVs
Goto : Sanyo DVD , Sanyo Sound Bar , Sanyo Blu-Ray
The universal code for most is 049 for a Sanyo TV.
1. With your universal remote you press the code search key until it illuminates and then you press and release the TV key.
2. Next enter the three digit code (3 digit remote code page) and the indicator light turns off.
3. If you enter in the wrong code the light will flash rapidly.
4. Aim the remote at your tv and press the on/off key.
5. If your tv turns off then you have found the right code!
Sanyo TV Remote Codes
use these codes for your Sanyo TV : 054, 069, 023, 025.
If those do not work then also try: 004, 013, 049, 108, 110, 180, 209
Codes for Sanyo TV using Sony Remote
- 330,335
Codes for Sanyo TV using Comcast xfinity remote
- 10154, 10159
Codes for Sanyo TV using Cox remote
- 0054, 0154, 0088, 0799, 1142
Codes for SANYO TV using one for all remote
- 0049 0097 0110 0004 0268 0012 0108 0180
Codes for SANYO TV using one for using DirecTV remote -
- 10154, 10088, 10107, 10146,
- 10159, 10232, 10484, 10799,
- 10893, 11142, 10208, 10339
Sanyo Soundbar Remote Control Codes
Program your universal remote control to an Sanyo Sound Bar. Use the following 3 and 5 digit remote codes.
Sanyo Soundbar 3 Digit Remote Control Codes:
- 590
- 611
- 627
- 661
- 683
Sanyo Soundbar 5 Digit Remote Control Codes:
- 20047
- 10154
- 10159
- 10051
- 10250
- 20035
- 30189
- 30531
- 20081
- 21593
- 20593
- 20000
- 20039
- 20149
- 21781
The above codes have shown to work with Sanyo soundbar models FWSB415E, FWSB405FS, FW405SB, and FWSB405F.
If these remote codes do not work, try the code search on your CAB or SAT remote…
ATT Remote RC7X:
Program your Sanyo soundbar to the RC7x remote control:
Follow the instructions by going to…
-MENU
-SETTINGS
-SETTINGS & HELP
-REMOTE CONTROL
-AUDIO DEVICE
With DIRECTV or ATT as your cable with DIRECTV Remote Control:
-Sanyo Soundbar on
-Volume up but muted
-AV1 or AV2
-Press and hold MUTE and SELECT for 2 blinks
-Enter 9 9 1 and wait 2 blinks
-Enter 3
-Press and release VOL UP
-Point the remote at the Sanyo soundbar and keep pressing and releasing the CH UP key
-When the volume changes, press select to lock in code.
If DIRECTV remote controls the power of the Sanyo soundbar but not volume, try this:
- AV1 or AV2
- Press and hold MUTE & SELECT
- Wait for 2 blinks and release
- Enter 9 9 3
- Press SELECT
How to program Sanyo TV using Comcast remote
- Turn on your Sanyo sound bar
- Press Aux once
- Press and hold Setup until the key blinks twice
- Release Setup
- Enter 9 9 1 3
- The Aux key will blink twice
- Press Power and aim the remote control at the Sanyo sound bar
- Press CH+ until the sound bar turns off
NOTE: In the code search mode, the remote control will send IR codes from its library to the selected device.
- Press Setup once to lock in the code
- The Aux key will blink twice
How to Program Sanyo TV With a Comcast Xfinity remote with the red ok button:
- Press aux then press and hold setup till it blinks twice
- Enter code from list above
(This code will control the volume)
Comcast Xfinity remote with the red ok button – To lock to the Sanyo soundbar:
Hold setup till it blinks twice
Enter 9 9 3
Press aux
To take the lock off and make it independent of each device:
Hold setup till it blinks twice
Press 993 then vol+ once
(Now you can select each device you want to change the volume for)
The above CODE SEARCH (Remote Control Programming) methods are written for Comcast and DIRECTV remotes but can be used and tried with ANY universal remote. The code search methods above are examples of how to get your current remote to control your Sanyo soundbar.
Sanyo DVD Player 4 Digit Remote Control Codes:
- 0670
- 0695
- 0790
- 1919
- 0873
- 0896
- 2050
- 2393