You are here

Home

Samsung TV Remote Codes.

Make: 
Samsung
Model: 
BN59-00599A

The Samsung BN59-00599A full-function or Universal remote control to operate varios devices and you can program the remote control to operate most of the popular brands of audio/video equipment like a TV, a DVD player (or VCR), or a Network satellite receiver. See Programming for Other Equipment on This remote control may have features not used by your receiver. This guide makes it easy to set up and use your remote control this guide contains in-depth information to help you get the most from your remote control, including controlling other equipment like TVs, VCRs, and DVD players.

Looking for remote codes Goto Remote Codes Section 3, 4 & 5 Digit Universal Remote Control Codes For Samsung TVs

If you press power button pointing to the device if it powers off then its already programmed and do not need further programming. If the device is not responding check the batteries in the remote it may be that batteries are exhausted.

How to program Samsung TV to use universal remote code:

  1. Make sure that the DTA is powered on and properly installed.

  2. Be sure your remote is able to see the front of the Adapter during setup.

  3. Using your Adapter’s remote, press and hold the PROG button until the LED on the remote turns on, then press the INFO button.

  4. The LED on the remote will blink slowly to show that it is now in pairing mode.

  5. Enter the 3-digit number that appears on your TV screen with the keys on your remote.

  6. If the numbers are entered correctly, then your TV will show Success.

  7. If the numbers are not entered correctly, your TV will show Sorry, the entry was incorrect.

  8. You can try again by entering the displayed code.

   

 

Second Method:

  1. Press and hold “PROG” button for few seconds.

  2. You will see a red solid light.

  3. Release “PROG” button and then press “TV” key one time, do not keep pressed.

  4. Enter the TV code for Samsung : 0101, and keep trying with Samsung 4 digit and 5 digit remote code list below

  5. The LED light will go off after the correct code is entered.

Samsung 4 digit remote control codes:

0019, 0618, 0644 , 0056
0060, 0587 , 0037, 0178
0030, 0556, 0009, 0702
0774, 0093, 0217, 0448 
0747, 0482, 0370,
0264,0329,0090,0032
0216,0290,0154,0150
0092,0072,0179,0208
0519,0156,0163,0625
0226,0812,0817,0821,1060

Remore Codes Samsung TV using Philips Remote:

0112, 0309, 0209, 0512, 0302, 0502, 0002,
0102, 0110, 0818, 0895, 0437, 0802, 0103, 0609, 0012, 0212

Remore Codes Samsung TV using One-For-All Universal Remote:

0587, 0178, 0093, 0060, 0030, 0019, 0056

Remore Codes Samsung TV using  GE Universal Remote

0105, 007,7 0076, 0109, 0007, 0009, 0004,
0005, 0085, 0172, 0942, 0358, 0012, 0015, 0080, 0104, 0106

Remore Codes Samsung TV using  RCA Universal Remote

Samsung TV 4 digit codes: 1004, 1009, 1012, 1013, 1014, 1015, 1025, 1046, 1056,
1065, 1069, 1078, 1083, 1102, 1103, 1104, 1123, 1124, 1194, 1205, 1207

Samsung TV 5 digit codes: 10812, 10054, 10060, 10702, 10178, 10030, 10056, 10650, 10766, 10814, 11060

Remore Codes Samsung TV using  Innovage Jumbo Remote Samsung codes:

004, 005, 009, 015, 104, 105,106, 109, 172

Remore Codes Samsung TV using  Samsung IR Codes

0051, 0161, 0181, 0261, 0301, 1181, 1561,
1661, 2141, 2391, 2401, 2551, 2791, 3211,
3601, 3661, 3711, 3721, 3741, 3751, 3761,
3771, 3781, 3791, 3811, 3821, 3831, 3861,
3881, 3911, 3921, 4091, 4101, 4111, 4121,
4831, 4841, 5191, 5201 (3211 work for Plasma and Led TV)

Use the remote control's mode buttons to set the remote to the correct mode for the equipment. Be sure to program the remote control to operate the other equipment as described on manual. To change the mode, press the button for the equipment you want to control. The mode button lights for three seconds to show you've set the remote to that mode.

 
Depending on how the remote is set up, the remote control may use UHF radio signals, IR signals, or both to control the receiver. However, only IR signals are used to control other equipment. IR signals travel short distances generally 20 feet or 7 meters they can go up to 40 feet, and cannot go through walls or other solid objects. Point the remote control directly at the equipment you want to control, with no objects to block the signal path.
 
This manual shows you how to program the remote control to operate a TV. The following section uses a different method to program the remote control to operate a TV or other equipment (such as a DVD player or VCR, tuner, amplifier, audio receiver or a second TV). You can program the remote control by either following the instructions in Programming Using Equipment Remote Code Tables, or the Scanning for Equipment Codes procedure.
 
When programming the remote control to operate combination equipment, such as a TV/DVD or a TV/VCR, program the remote control in one mode, and then repeat the procedure in the other mode. For example, to program the remote control to operate a TV/DVD player using code 765, follow the instructions to program the remote to operate the TV using codes, and then repeat the instructions for the DVD using the same code. Put the remote in TV mode to use TV functions, or DVD mode to use the DVD player (or VCR) functions.