Use the following directions to program your VIZIO Universal Remote Control to use with your DAEWOO TV (including LCD, LED and Plasma) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0130 0004 0009 0100 0005 0138 0043 0140 0039 0444 0080 0042 0058 0017 0010 0126 0018 0127 0019 for your DAEWOO TV (including LCD, LED and Plasma) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: DAEWOO.

Device Type: TV (including LCD, LED and Plasma) .

Remote Code List:0130 0004 0009 0100 0005 0138 0043 0140 0039 0444 0080 0042 0058 0017 0010 0126 0018 0127 0019