You are here

Home

Universal Remote Codes

How to Program a Universal Remote using Universal Remote Codes

Universal remote controls can be programmed to be used with mutiple devices like TV, Blu-Ray and AV Receivers, you can ditch several different remote controls  for one Universal remote. Universal remote can control all home theater devices and components. Universal remote allows you to set aside the individula device remotes for one Universal remote. With a universal remote you can start using it by first programming the remote with each individual device in the home theater arsenal. 

Universal Remote Codes manual setup and Instructions

Universal Remote Codes

Before starting, make sure you have hooked up all the cables and powered on the devices and componets. then, make sure battries are working in the remote.

Step 1. Enter device into setup mode

Locate SETUP button on universal remote control, Press and hold the setup button till you see red light is on. then stop holding the setup button. now remote is in setup mode.

Step 2. Select the device type as TV

Quickly press and release the TV button you want to setup.

Step 3. key the universal remote code coresponding to your device from below list.

Use the number keypad to enter universal remote code, Now red light will trun off.

Step 4. Verifying the results.

Point Universal remote in the direction of the device and try to trun on and off the device. if the device responds your all set.  otherwise repeat the steps using next four digit code from below list.

Step 5. Setting up other device.

repeat the above steps to setup more devices.

Universal Remote codes list with Instructions

If your looking for universal remote codes look no further, we got almost all remote brands with 3 digit and 4 digit remote codes from Samsung to Logitech.