Congratulations on your purchase of the RCR804BFDR/RCR804BR. This userfriendlyremote makes juggling multiple remote controls a thing of the past! Thisone unit controls up to four components, including the most popular brands of TVs,VCRs or DVD players, and satellite receivers, cable boxes, or digital TV converterboxes. The RCR804BFDR/RCR804BR is easy to use, easy to program, and it givesyou total control—at the touch of your fingertips!
Battery Installation
Your RCR804BFDR/RCR804BR universal remote requires 2 new AAA alkaline batteries(sold separately).To install the batteries:1. Turn the unit over, and remove the battery compartment cover.2. Insert the batteries, matching the batteries to the (+) and (-) marks insidethe battery case.Battery Precautions:• Do not mix old and new batteries.• Do not mix alkaline, standard (carbon-zinc) or rechargable (nickel-cadmium) batteries.• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them inaccordance with Local and National Regulations.
Programming with Direct Entry
To program your remote to control up to fourcomponents, follow these steps:1. Manually turn on the component you wish toprogram the remote to operate.2. Find the four-digit code for your brand of TV,VCR, DVD, satellite receiver, cable box, ordigital TV converter in the enclosed code lists.3. Press and hold the CODE SEARCHkey until the indicator light turns on.4. Release the CODE SEARCH key.5. Press and release the TV, VCR orSAT·CBL·DTC key. The indicator lightblinks and then remains lit.Note: DTC references digital TV converter.To program the DVD·AUX key: Press theDVD·AUX key. To control a DVD, press theVCR key. To control a TV, press the TV key. Tocontrol a satellite receiver, cable box, or digitalTV converter, press the SAT·CBL·DTC key.The indicator light stops blinking and remainslit.6. Enter the four-digit code, using the numerickeypad. After the code is entered, theindicator light turns off.Note: If the indicator light blinks multiple times, you’veentered an invalid code. Start from step 2 again.7. Aim the remote at the component andpress the ON·OFF key. The componentshould turn off.Note: If your component does not respond, try all thecodes for your brands. If the codes do not work or yourbrand is not listed, try the Code Search Method thatfollows.