3 Digit Remote Codes For Old GE Universal Remotes For Cable Box

9 February 2025

Old Ge Universal remote controls that use 3 digit codes can be programmed to be used with many devices like TV, Blu-Ray and AV Receivers, you can ditch several different remote controls  for one Ge Universal remote. Ge remote can control all home theater devices and components. Ge Universal remote allows you to set aside the individula device remotes for one Ge remote. With Ge universal remote you can start using it by first programming the remote with each individual device in the home theater arsenal. 

Before you begin, make sure you have hooked up all the cables and powered on the devices and componets. then, make sure battries are working in the remote.

3 digit GE Universal Remote Codes manual setup and Instructions

Make sure to hookup and power on all the devices you want to setup. next make sure the batteries are working in the GE universal remotes. Note down the GE universal remote codes from the list provided. Nothing is more frustrating to find out that you have not hooked up or universal remote batteries are bad after spending your evening on programming GE remote. 

Step 1. Enter device into setup mode

Locate SETUP button on the GE universal remote control, Press and hold the setup button till you see red light is on. then stop holding the setup button. now remote is in setup mode.

Step 2. Select the device 

quickly press and release the device button you want to setup. For example if your programming TV then press TV button and release it.

Step 3. key the universal remote 3 digit code coresponding to your device from below list.

Use the number keypad to enter universal remote code, Now red light will trun off.

Step 4. Verifying the results.

point GE Universal remote in the direction of the device and try to trun on and off the device. if the device responds your all set.  otherwise repeat the steps using next four digit code from below list.

Step 5. Setting up other device.

repeat the above steps to setup more devices.

3 digit remote codes for old GE Universal remotes to program Cable box

Brand Code
ABC 001, 002, 003, 004, 005, 006, 007
Antronix 008, 009
Archer 008, 009, 010, 011
Cabletenna 008
Cableview 008
Century 011
Citizen 011
Colour Voice 012, 013
Comtronics 014, 015
Contec 016
Eastern 017
Garrard 011
GC Electronics 009
Gemini 018, 019, 049
General Instrument 003
Hamlin 020, 021, 022, 035, 045
Hitachi 003
Hytex 002
Instant Replay 021
Jasco 011
Jerrold 001, 003, 005, 007, 018, 023, 024, 046
Magnavox 025
Memorex 026
Movie Time 002, 027
NSC 002, 027
Oak 002, 016, 029
Panasonic 000, 048
Paragon 026
Philips 011, 012, 013, 019, 025, 030, 031, 032
Pioneer 033, 034
Pulsar 026
RCA 000, 047, 049
Realistic 009, 049
Regal 022, 035,
Regency 017
Rembrandt 003
Runco 026
Samsung 014, 034
Scientific Atlanta 006, 036, 037, 038
Signal 014, 018
Signature 003
Sl Marx 014
Sprucer 000
Starcom 001, 007, 018
Stargate 014, 018
Starquest 018
Tandy 040
Toshiba 026
Tusa 018
TV86 027
Unika 008, 009, 011
United Artists 002
United Cable 001
Universal 008, 009, 010, 011
Videoway 044
Viewstar 015, 025, 027, 040
Zenith 026, 050, 051