Use the following directions to program your VIZIO Universal Remote Control to use with your ZENITH DVD/VCR Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list [0405 & 0245] for your ZENITH DVD/VCR Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: ZENITH.

Device Type: DVD/VCR Combos .

Remote Code List:[0405 & 0245]

Use the following directions to program your VIZIO Universal Remote Control to use with your ZENITH TV/VCR Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0226 0227 0247 0266 0288 0310 0338 0358 for your ZENITH TV/VCR Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: ZENITH.

Device Type: TV/VCR Combos .

Remote Code List:0226 0227 0247 0266 0288 0310 0338 0358

Use the following directions to program your VIZIO Universal Remote Control to use with your ZENITH DVD Recorder device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0907 for your ZENITH DVD Recorder device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: ZENITH.

Device Type: DVD Recorder .

Remote Code List:0907

VIZIO Universal Remote Code for Zenith is

0232

Use the following directions to program your VIZIO Universal Remote Control to use with your ZENITH Laser Discs device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0232 for your ZENITH Laser Discs device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: ZENITH.

Device Type: Laser Discs .

Remote Code List:0232

Use the following directions to program your VIZIO Universal Remote Control to use with your ZENITH DTV/ATSC Digital to Analog Converter device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1750 for your ZENITH DTV/ATSC Digital to Analog Converter device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: ZENITH.

Device Type: DTV/ATSC Digital to Analog Converter .

Remote Code List:1750

Use the following directions to program your VIZIO Universal Remote Control to use with your ZENITH DVR (use code (A)(B) etc. if you have 2 or more of the same device) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0656 for your ZENITH DVR (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: ZENITH.

Device Type: DVR (use code (A)(B) etc. if you have 2 or more of the same device) .

Remote Code List:0656

Use the following directions to program your VIZIO Universal Remote Control to use with your ZENITH DVD device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0398 0405 0907 for your ZENITH DVD device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: ZENITH.

Device Type: DVD .

Remote Code List:0398 0405 0907

Use the following directions to program your VIZIO Universal Remote Control to use with your ZENITH Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0617 0634 0656 0595 0646 0562 0574 0587 0635 for your ZENITH Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: ZENITH.

Device Type: Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) .

Remote Code List:0617 0634 0656 0595 0646 0562 0574 0587 0635