How to connect a universal remote to a TV :

1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.

2. Press and hold the CODE SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release.

3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press AUX then the device Button you are assigning to AUX. The INDICATOR LIGHT will blink then remain lit.

4. Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will turn off.

5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the POWER button. Your device should turn off.

Note:  If your device does not respond to the first code listed, If your TV, VCR, DVD, etc. does not respond after you have tried all the codes for your brand or if your brand is not listed, try searching for your codes by  following the steps below.

1.Turn on the device you wish to program.

2.LIGHT lights, then release. Press and hold CODE SEARCH/SETUP until the INDICATOR

3.programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will blink once then remain lit. For AUX, press AUX then the device

button you are assigning to AUX. Press and release the device button for the device you are

4. 2 seconds between each time you press POWER. Important: You may have to press POWER up to 250 times.Press and release POWER until your device turns off. Wait at least

5.INDICATOR LIGHT will go off.

When your device turns off press the ENTER/SAVE button. The SLEEP FEATURE (RM94902, RM94904 and RM94905) This feature will turn off your TV at the time you choose from 1-99 minutes.

To Use the Sleep Feature:

1. Press and hold the SLEEP button until the INDICATOR LIGHT stays lit.

2. Enter time in minutes using the numerical keypad. (Minutes 1-99;press 0 before the actual number).

3. Lease remote aimed at television. The Sleep Function will not function properly unless the remote is left aimed at the television.

Turn Off the Sleep Feature: 

Press and hold SLEEP until the INDICATOR LIGHT blinks or press the

POWER button to turn off the TV.

1. Turn on a device.
2. On the remote control, press a device key once (e.g., AUX, VCR, or CABLE). Press and hold SETUP until the selected mode key flashes twice, then release SETUP.
3. ENTER the four digit code for your device found in the sidebar to the right. If performed correctly, the selected mode key will blink twice. If the selected mode key emits a long blink, the code is invalid. Repeat steps 2 through 3 and try entering the same code again.
4. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code.
5. Repeat steps 1-4 for each device you want the remote control to control. For future reference, write down each working device code.

Zenith converter box remote codes. Here is a list of remote codes for the Zenith Converter Box. These codes can be used to control your TV with the Zenith converter box remote control or a Universal remote. You can control Television sets for all major brands after programming the converter box remote control or a universal remote with the remote codes below. The codes below are 3, 4, and 5 digits formats. You may need to test more than one remote code before it will work with your Zenith TV Converter Box. Keep testing them as one of them WILL work and control the Channels and Volume.

Zenith TV Converter Box Remote Codes

3 Digit Zenith TV Converter Box Remote Codes
212
254
267
357
454
457
557
657
757
857
955
957
991

4 Digit Zenith Converter TV Box Remote Codes
1415
9910

5 Digit Zenith Converter Box TV Remote Codes
01414
51415

How Does The Zenith Digital Converter Box Work? – Can I Use A Different Remote? – What If I Lost My Zenith Converter Box Remote?
When your Zenith Digital TV Converter Box is connected to your TV, the Antenna signal input comes into and through the digital converter box. The digital converter box then converts the Antenna signal input into a higher definition digital format. When the digital converter box is connected to your TV, you can use the Zenith remote control that came with the Zenith TV converter box to change the channels on your TV.

You will also need that remote control to change the volume UP or DOWN on the TV. You do have a choice of remotes… You can either use the remote control that came with the Zenith digital TV converter box or get a higher quality Universal remote control. Need to replace the Zenith remote or did you lose the original Zenith remote? If so, keep reading below…

If you choose to get a different higher quality universal remote control to control the Zenith Digital TV converter Box, you can easily program the universal remote control by using the remote codes above to work with the Zenith Digital TV Converter Box. Whatever universal remote you choose to purchase, the programming instructions will be included with the remote. Use the instructions to program the universal remote control but use the remote control codes above that are designated to work with the Zenith TV Digital Converter Box.

How to set up your Zenith digital TV converter box – Video

 Zenith Universal Remotes Codes for all devices: 101, 142, 149, 177, 201, 224, 225, 229,
237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521 

More Codes

3 Digit Zenith TV Converter Box Remote Codes
212
254
267
357
454
457
557
657
757
857
955
957
991

4 Digit Zenith Converter TV Box Remote Codes
1415
9910

5 Digit Zenith Converter Box TV Remote Codes
01414
51415

How Does The Zenith Digital Converter Box Work? – Can I Use A Different Remote? – What If I Lost My Zenith Converter Box Remote?
When your Zenith Digital TV Converter Box is connected to your TV, the Antenna signal input comes into and through the digital converter box. The digital converter box then converts the Antenna signal input into a higher definition digital format. When the digital converter box is connected to your TV, you can use the Zenith remote control that came with the Zenith TV converter box to change the channels on your TV.

You will also need that remote control to change the volume UP or DOWN on the TV. You do have a choice of remotes… You can either use the remote control that came with the Zenith digital TV converter box or get a higher quality Universal remote control. Need to replace the Zenith remote or did you lose the original Zenith remote? If so, keep reading below…

If you choose to get a different higher quality universal remote control to control the Zenith Digital TV converter Box, you can easily program the universal remote control by using the remote codes above to work with the Zenith Digital TV Converter Box. Whatever universal remote you choose to purchase, the programming instructions will be included with the remote. Use the instructions to program the universal remote control but use the remote control codes above that are designated to work with the Zenith TV Digital Converter Box.

How to set up your Zenith digital TV converter box – Video

3 & 4 Digit Universal Remote Control Codes For TOSHIBA TVs

TOSHIBA TV 3 Digit Remote Control Codes:
013
049
089
105
109
117
118
120
159
178

TOSHIBA TV 4 Digit Remote Control Codes:
0260
0358
0394
0924
0398
0983
0973

Programming your Zenith remote with a remote control code:

1. Turn on the media device you are going to program. (EX: If you are going to program a Blu-Ray player, turn the Blu-Ray player ON manually)

2. Using your Zenith remote control – Press and hold the “CODE SEARCH” button and wait for the small light to illuminate.

3. Once the small light on the remote illuminates, release the “CODE SEARCH” button.

4. Find the button on the Zenith remote control that corresponds to the media device you are going to program. (EX: DVD, SAT, CAB, AUX)

5. Now press and release the (EX: DVD, SAT, CAB, AUX) button for the media device you are programming.

6. Find out the code you need for the media device you are setting up.

7. (The 3, 4, or 5 digit remote code for the media device you are programming should be located in the Zenith remote control instruction manual or by using our website and finding the remote code using the links to the right)

8. Once you have found a list of remote codes for the media device you are programming… Enter the 3, 4, or 5 digit remote code into the remote using the number keys.

9. The small light will turn off once a code is entered.

10. Now check to be sure the remote code you entered into the Zenith remote is the correct code by pressing CHANNEL UP, VOLUME UP, OR POWER OFF to see if the code you entered is the correct code.

11. If the media device responds, then you have entered the correct code, if not, keep trying different remote codes by following the same procedure above.

Programming your Zenith remote with the “Code Search” button:

1. Turn on the media device you are going to setup or program. (EX: If you are going to program a DVD player, turn ON the DVD player manually)

2. Using your Zenith remote control – Press and hold the “CODE SEARCH” button and wait for the small light to illuminate.

3. Once the small light on the remote illuminates, release the “CODE SEARCH” button.

4. Find the button on the Zenith remote control that corresponds to the media device you are going to program. (EX: DVD, SAT, CAB, AUX)

5. Now press and release the (EX: DVD, SAT, CAB, AUX) button for the media device you are programming.

6. Scroll through the codes that are already programmed into the Zenith remote by pressing either the “POWER” button or the “CHANNEL UP” button.

7. (This depends on the model number of your Zenith remote control, try both ways to see which one works for your specific Zenith remote)

8. Keep pressing the “POWER” or “CHANNEL UP” button until you find a code that works.

9. When you find the remote code that works with your media device simply press the “MUTE” button to save the code.

10. If you find a code that works but you scroll past it, you need to press the “CHANNEL DOWN” button to go backwards to the previous code.

Universal Remote Codes for Zenith

Craig
805, 906

Daewoo
002, 102, 110, 203, 214, 221, 303, 311, 314

Emerson
002, 003, 004, 005, 006, 014, 104, 105

Fisher
506, 606, 619, 902

Fujitsu
206

Funai
206, 805, 906

GE
002, 007, 018, 107, 310, 318, 502, 601, 719, 803

Goldstar
002, 102, 117, 207, 217, 307, 502, 713, 818, 916

Hitachi
002, 016, 116, 218, 310, 315, 415, 502, 507, 516, 619

JVC
007, 108, 208, 308, 417, 502, 510, 617, 606, 702, 902

Magnavox
002, 008, 109, 118, 209, 309, 402, 408, 502, 508, 510

Memorex
102, 502, 506, 601, 701

Mitsubishi
002, 102, 114, 206, 502, 509, 510, 619, 709, 803

Panasonic
017, 516, 618, 807, 901

Philips
002, 009, 109, 202, 209, 221, 310, 402, 408, 502, 508

Proscan
601, 719

RCA
002, 102, 211, 302, 320, 402, 406, 411, 502, 511, 514

Samsung
002, 102, 103, 112, 212, 502, 512, 702, 818, 908

Sansui
215

Sanyo
002, 312, 412, 506, 619, 902

Sharp
002, 013, 111, 502, 712, 812, 813, 918

Sony
202, 801

Sylvania
002, 009, 109, 117, 209, 309, 402, 408, 502, 508, 717

Symphonic
117, 520, 904, 906

Toshiba
112, 313, 413, 506, 510, 512, 902

Zenith
008, 117, 311, 405, 407, 512, 601, 701, 713, 916

The Zenith remote control programming methods above apply to model number remotes: ZEN100, ZEN300, ZEN350, ZEN400, ZEN425, ZEN450, ZEN500, ZEN525, ZEN700, ZEN725, ZEN800 and ZEN900.

Apex Digital 10890
Audiovox 10180, 10802, 10875
Dell 11080, 11178
Envision 10813
Funai 10171
Go Video 10886
Hyundai 10849
iLo 11990
Initial 11990
Insignia 11204, 12002
Kost 11262
LG 10856, 11178, 11993
Magnavox 11454, 10802, 11198, 11990
Marantz 10855
Maxent 11755
Mintek 11990
Mitsubishi 11250
Olevia 11144, 11240, 11331
Panasonic 10650, 11941

Petters 11523
Philips 11454
Polaroid 11262, 11276, 11341, 11523
RCA 10047, 11958
Sampo 11755
Samsung 10812, 10766, 10814
Sharp 10093, 11602
Signet 11262
Superscan 10864
SVA 10587, 10870, 10871
Sylvania 10171, 11271, 11314
Symphonic 10171
Syntax 11144, 11240, 11331
Techview 10847
Toshiba 10845, 11656
Viewsonic 10857, 10864, 10885, 11330, 11578
Vizio 10864, 10885, 11756, 11758
Westinghouse 10885, 10889, 10890, 11282, 11577
Zenith 11265