Soniq TV Universal 4 Digit Remote Codes

1473
0178
0180
0003
0092
0045
0019
0030
0056
0032
0047
0054
0060
0039

Programming Soniq Remote control 

1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your SONIQ TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA

Remote Control Codes For Supersonic TVs

Supersonic makes TVs from 13.3 inches to 40 inches. Many of the televisions Supersonic makes are for RV’s. Many of these TVs are AC/DC Compatible for RVs. The 13.3 inch TV, 15.6 inch TV, 19 inch TV, 22 inch TV, and 24 inch are AC/DC compatible. NOTE: The 39 inch TV and the 40 inch TV are NOT AC/DC compatible. If you have an RV TV, you can still use the remote codes provided.

Supersonic TV Remote Control Codes

0208
0556
0698
0264
0805

ON MOST REMOTE CONTROLS:
1. Turn on the Supersonic TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 4 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 4 digit code.
6. The button will blink twice to confirm the code is stored.

Remote codes for Telefunken TVs:
1033
1069
1101
1102
1104
1105
1107
1108
1109
1113
1136
1140
1181
1196
1197
1198
1199
1200
1201
1202
1204
1404
1412
1435
1469
1470
1472
1477
1522
1523
1568
1572
1648
1650
1652
1658
1661
1686
1702
1717
1719
1734
1740
1756
1757
1765
1766
1773
1850
1855
1866

Telefunken multi-brand remote codes for TV’s.
1 – Turn on TV.
2 – Press and hold the TV key and enter the codes for your brand.
3 – If your TV turned off then you entered the right code and setup is complete.

vizio universal remote codes are listed below, before programming vizio tv using universal remote codes Make sure to hookup and power on Vizio tv and all the devices you want to setup. next, make sure battries are working in the Vizio or universal remotes. Write down the Vizio universal remote codes from the list provided below. Nothing is more frustrating to find out that you have not hookedup or universal remote batteries are bad after spending your evening on programming universal or Vizio remote. 

This article is about Programming Vizio TV using Universal remote or a replacement remote, if you are looking for "how to program Vizio Remote universal remote for tv" see our article on Using Vizio remote to operate devices in your entertainment system here 

How to program VIZIO Tv using a Universal Remote control code

Use the following instructions and code list to program your VIZIO Universal Remote Control

Step 1

Manually turn on your TV (or device you want to control)

Step 2

Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

Step 3

Enter the programming code for your VIZIO TV from the code list  below and enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off.

Step 4

Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete.

Step 5

If not, repeat steps with a different code.

Vizio 2 digit, 3 digit, 4 digit and 5 Digit Universal Remote   Control Codes For VIZIO TV

vizio Universal remote codes  2 Digit for Vizio TVs

19

vizio remote codes 3 Digit for programming  Vizio TVs

502
627
004
113
505
011

vizio remote codes 4 Digit Remote Codes for Vizio TVs

1758
0178
1756
0128
0117
1017
1078
0030
0056
0205
1292
1004

vizio remote codes  5 Digit programming Codes for Vizio TVs

10178
10117
11756
11758
01377
10885
10864
10120

Vizio remote codes to Program vizio tv with verizon Fios Universal Remote

0891, 0912, 1292, 1783, 3145

 Vizio remote codes for Philips RC, Motorola, and Scientific-Atlanta AllTouch remote controls

0891, 0912, 1292, 1783, 3145

How to Program a Vizio Remote Control

Program the Vizio Remote Control For Cable TV

1. Power on the cable TV set-top box.

2. Press the "CBL" button on the Vizio remote control.

3. Push and hold down the "SET" button until the LED indicator light flashes twice.

4. Enter the remote programming code for your cable TV box with the Vizio remote's numeric keys. Wait for the LED indicator to flash twice after you enter the last number.

5. Point the remote control at your cable TV box and then press the "POWER" button to switch off the cable box.

Program the Vizio Remote Control For a DVD Player or Recorder

1. Power on the DVD device.

2. Press the "DVD" button on the Vizio remote control.

3. Push and hold down the "SET" button until the LED light flashes twice.

4. Enter the code for your DVD. Wait for the LED indicator to flash twice.

5. Point the remote control at your DVD device and press the "POWER" button to switch it off.

Program the Vizio Remote Control For a VCR

1. Switch on the VCR.

2. Press the Vizio remote button that you want to use for the VCR; for example, you might want to select the "Audio" button if you don't have a home audio system.

3. Press and hold the "SET" button until the LED light flashes twice.

4. Enter the remote code for your VCR. Wait for the LED indicator to flash twice.

5. Aim the Vizio remote control at the VCR and press "POWER" to switch off the device.

Program your universal remote control to an Sanyo Sound Bar. Use the following 3 and 5 digit remote codes.

Sanyo Soundbar 3 Digit Remote Control Codes:
590
611
627
661
683

Sanyo Soundbar 5 Digit Remote Control Codes:
20047
10154
10159
10051
10250
20035
30189
30531
20081
21593
20593
20000
20039
20149
21781

The above codes have shown to work with Sanyo soundbar models FWSB415E, FWSB405FS, FW405SB, and FWSB405F.

If these remote codes do not work, try the code search on your CAB or SAT remote…

ATT Remote RC7X:
Program your Sanyo soundbar to the RC7x remote control:
Follow the instructions by going to…
-MENU
-SETTINGS
-SETTINGS & HELP
-REMOTE CONTROL
-AUDIO DEVICE

With DIRECTV or ATT as your cable with DIRECTV Remote Control:
-Sanyo Soundbar on
-Volume up but muted
-AV1 or AV2
-Press and hold MUTE and SELECT for 2 blinks
-Enter 9 9 1 and wait 2 blinks
-Enter 3
-Press and release VOL UP
-Point the remote at the Sanyo soundbar and keep pressing and releasing the CH UP key
-When the volume changes, press select to lock in code.

If DIRECTV remote controls the power of the Sanyo soundbar but not volume, try this:
-AV1 or AV2
-Press and hold MUTE & SELECT
-Wait for 2 blinks and release
-Enter 9 9 3
-Press SELECT

Code Search using silver Comcast remote with a red OK/Select button:
-Turn on your Sanyo sound bar
-Press Aux once
-Press and hold Setup until the key blinks twice
-Release Setup
-Enter 9 9 1 3
-The Aux key will blink twice
-Press Power and aim the remote control at the Sanyo sound bar
-Press CH+ until the sound bar turns off
NOTE: In the code search mode, the remote control will send IR codes from its library to the selected device.
-Press Setup once to lock in the code
-The Aux key will blink twice

With a Comcast Xfinity remote with the red ok button:
-Press aux then press and hold setup till it blinks twice
-Enter code from list above
(This code will control the volume)

With a Comcast Xfinity remote with the red ok button – To lock to the Sanyo soundbar:
-Hold setup till it blinks twice
-Enter 9 9 3
-Press aux
To take the lock off and make it independent of each device:
-Hold setup till it blinks twice
-Press 993 then vol+ once
(Now you can select each device you want to change the volume for)

The above CODE SEARCH (Remote Control Programming) methods are written for Comcast and DIRECTV remotes but can be used and tried with ANY universal remote. The code search methods above are examples of how to get your current remote to control your Sanyo soundbar.

SAT – DTV – DISH – DIRECTV – TUNER – CONVERTER – Universal Remote Codes

ADMIRAL Remote SAT DTV Codes: 0576

BELL EXPRESS Remote SAT DTV Codes: 0654, 0647, 0655, 0628

CHANNEL MASTER Remote SAT DTV Codes: 0577, 0578, 0579

CHAPPARAL Remote SAT DTV Codes: 0560, 0561

DRAKE Remote SAT DTV Codes: 0562, 0574, 0587

DIRECTV Remote SAT DTV Codes: 0622, 0632, 0629, 0621, 0623, 0576, 0586

DISH NETWORK Remote SAT DTV Codes: 0628, 0612, 0654, 0588, 0589, 0590

DISHPRO Remote SAT DTV Codes: 0588, 0589, 0590, 0654

DX ANTENNA Remote SAT DTV Codes: 0568, 0582

ECHOSTAR Remote SAT DTV Codes: 0628, 0612, 0654, 0588, 0589, 0590

EXPRESS VU Remote SAT DTV Codes: 0654, 0647, 0655, 0628

FORTEC STAR Remote SAT DTV Codes: 0569, 0555, 0556, 0557, 0558, 0559

FUJITSU Remote SAT DTV Codes: 0591, 0592

GE Remote SAT DTV Codes: 0636, 0649, 0637, 0622, 0653, 0650

GEMINI Remote SAT DTV Codes: 0595

GENERAL INSTRUMENT Remote SAT DTV Codes: 0648, 0640, 0645, 0564, 0565, 0566, 0593

HITACHI Remote SAT DTV Codes: 0638, 0629, 0630, 0632, 0641, 0607

HUGHES NETWORK Remote SAT DTV Codes: 0641, 0621, 0607, 0580

JVC Remote SAT DTV Codes: 0628, 0612

MAGNAVOX Remote SAT DTV Codes: 0576, 0612, 0639

MACOM Remote SAT DTV Codes: 0600

MITSUBISHI Remote SAT DTV Codes: 0641, 0632, 0638, 0629, 0630

MOTOROLA Remote SAT DTV Codes: 0648, 0618

NORSTAT Remote SAT DTV Codes: 0601

PACE Remote SAT DTV Codes: 0614, 0615, 0646

PANSAT Remote SAT DTV Codes: 0584, 1048

PANASONIC Remote SAT DTV Codes: 0626, 0586, 0596

PRIMESTAR Remote SAT DTV Codes: 0627, 0640

PHILIPS Remote SAT DTV Codes: 0576, 0612, 0621, 0629, 0630, 0632, 0638, 0641, 0639

PHILIPS MAGNAVOX Remote SAT DTV Codes: 0576, 0612, 0639

PIONEER Remote SAT DTV Codes: 0604

PROSCAN Remote SAT DTV Codes: 0636, 0637, 0650, 0653, 0651, 0652

RCA Remote SAT DTV Codes: 0636, 0649, 0637, 0622, 0658, 0653, 0650, 0651, 0652, 0098

REALISTIC Remote SAT DTV Codes: 0567, 0603

SAMSUNG Remote SAT DTV Codes: 0594, 0583, 0613, 0616, 0619

SHARP Remote SAT DTV Codes: 0604

SKY NETWORK Remote SAT DTV Codes: 0614, 0615, 0646

SIERRA Remote SAT DTV Codes: 0561

SONY Remote SAT DTV Codes: 0623, 0657, 0659, 0585, 0602

STARCHOICE Remote SAT DTV Codes: 0640, 0645, 0627

STS Remote SAT DTV Codes: 0568, 0570, 0571

TOSHIBA Remote SAT DTV Codes: 0641, 0632, 0638, 0629, 0630, 0607, 0572

ULTIMATE TV Remote SAT DTV Codes: 0653, 0659

UNIDEN Remote SAT DTV Codes: 0633, 0573, 0611

ZENITH Remote SAT DTV Codes: 0617, 0634, 0656, 0595, 0646, 0562

ADMIRAL TV CODES = 001,173
AIWA TV CODES = 195,196
AKAI TV CODES = 002
AOC TV CODES = 009,014,132,156,175
APEX TV CODES = 214
AUDIOVOX TV CODES = 053
CITIZEN TV CODES = 009,042,053,058,105,109,177
CRAIG TV CODES = 042,053
DAEWOO TV CODES = 018,019,042,058,082,085,097,100,126,127,130,138
EMERSON TV CODES = 035,036,037,038,039,040,041,042,043,045,049,051,053
FUJITSU TV CODES = 051,197
FUNAI TV CODES = 042,051,053,155,189,198
GE TV CODES = 015,022,031,044,052,054,055,087,092,103,107,125,164
HITACHI TV CODES = 001,004,009,013,059,060,061,088,091,137,139,140,141,142,143,144
HAIER TV CODES = 216,217
JENSEN TV CODES = 004,009
JVC TV CODES = 013,054,055,060,065,067,089
LG TV CODES = 044,005,009,056,057,155,156,172
MAGNAVOX TV CODES = 004,008,009,062,068,069,074,075,077,089
MEMOREX TV CODES = 000,001,004,009,049,051,135
MITSUBISHI TV CODES = 004,005,009,022,051,081,089,132,180
NEC TV CODES = 003,004,005,009,010,085,089,095
PANASONIC TV CODES = 003,051,055,062,070,148,170,171
PHILIPS TV CODES = 062,068,069,074,075,077,086,087,089,163,183
PIONEER TV CODES = 004,009,090,179,185
PROSCAN TV CODES = 000,015,031,107
QUASAR TV CODES = 003,054,055,062,070,148,170,171
RCA TV CODES = 007,009,011,015,048,082,092,094,096,098,101,102,103,107,113
SAMSUNG TV CODES = 004,005,009,015,104,105,106,109,172
SANSUI TV CODES = 135,136
SANYO TV CODES = 004,013,049,108,110,180,209
SHARP TV CODES = 004,009,079,095,111,112,114,122,123,124,173
SONY TV CODES = 002,006,071,128
SYLVANIA TV CODES = 004,008,009,062,068,069,074,075,077,155,161,163,189,198
TOSHIBA TV CODES = 013,049,089,105,109,117,118,120,159,178
ZENITH TV CODES = 000,001,004,023,038,058,059,064,073,121,135,136

Remote codes for Vizio Blu Ray Players:
5 digit Vizio Blu Ray Remote Code: 22563
5 digit Vizio Blu Ray Remote Code: 21169
5 digit Vizio Blu Ray Remote Code: 12563
5 digit Vizio Blu Ray Remote Code: 21064
5 digit Vizio Blu Ray Remote Code: 00155
4 digit Vizio Blu Ray Remote Code: 1064
4 digit Vizio Blu Ray Remote Code: 1226