AOC TV 3 Digit Remote Control Codes
119
217
002
003
102

AOC TV 4 Digit Remote Control Codes
6060 (Most likely to work with AOC TVs)
0030 (Most likely to work with AOC TVs)
0093
0108
0178
0179
0180
0451
0019
0003
0052
0185
0628
0009
0018
0060
0092
0004
0005
0014
0156
0175
0187

 AOC TV Manuals For Model Numbers: L19W461, L19W961, L22W931, L32wa91, L32WB81, L47H861, LC32D1320, LC32W033, LC42D1320, LE19W037, LE22H037, LE24H037, LE24H138, LE26W154, LE32D1440/20, LE32D3330, LE32W037M, LE39D1440/20, LE39D3330, and LE40H137M. 

Auria TV 5 Digit Remote Control Codes
11423
10017
11265
10178
10856
11178

Auria TV Codes for RCA 3 in 1 Universal Remote = 12087

ON MOST REMOTES (Generalized):
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Haier TV Remote Control Codes
0217
0157
0081
0216

ON MOST REMOTES (Generalized):
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Kogan TV Universal Remote Codes

7890
0418
0641
0714
0726
0754
0779
0816
1190
2267
1404
0037
0587
0371
0218

What to do when Kogan TV Remote does not respond

Make sure that the batteries in your remote are properly inserted and have sufficient charge. Try replacing the batteries with fresh ones to see if that resolves the issue.

Check the remote for any debris or dirt that may be blocking the buttons. Clean the remote with a soft, dry cloth to remove any debris.

Sometimes, resetting the remote can fix any issues you may be experiencing. To do this, remove the batteries from the remote and press and hold any button for 15 seconds. Then, replace the batteries and try using the remote again.

If your Kogan TV has a Bluetooth remote, try re-pairing it with the TV. To do this, go to the TV settings and navigate to the Bluetooth settings. Select the remote and follow the on-screen instructions to re-pair it.

Troubleshooting Kogan TV

Check your TV is properly plugged into the power source and that the outlet is working. You can also try plugging in another device to ensure that the outlet is working correctly.

verify all the cables are securely connected to the TV and any other devices you may have connected to it, such as a cable box or gaming console.Make sure that your TV settings are properly configured. Check the picture and sound settings to make sure that they are set up correctly.

If none of the above steps work, try performing a factory reset of your TV. This will restore your TV to its original settings, which may resolve any issues you are experiencing.

Naxa TV Universal remote code is used to program your tv with any universal remote. use the listed universal remote codes start with 4 digit codes. Use below universal remote codes to program Naxa TV. follow the programming instruction described.

NAXA TV 5 Digit Remote Control Codes
12104
11998
24965
(There are no “official” universal remote codes for NAXA TVs,
these 5 digit codes have been shown to work on most NAXA model number televisions)

NAXA TV 3 Digit Remote Control Codes
Try the 9-2-2 auto search method
(Depending on remote and component used – See below for 9-2-2 method)

How to auto search on your remote control with the 9-2-2 method:

• Turn on your NAXA TV.

• Point your remote control at the TV.

• Search the remote control memory for the 3, 4, or 5 digit code.

• Press and hold the TV button.

• Simultaneously hold the OK key.

• All keys should flash twice.

• Enter “922” and the selected mode key should flash twice.

• Press and hold the POWER button.

• Wait for the TV to turn off before you release POWER.

• Use the REW button to look through each code backwards one at a time.

• Use the FF button to look through each code forwards one at a time.

• POWER or PLAY button will continue the auto search of the remote codes.

• Press ENTER when you find the correct code.

• The TV key will flash 3 times.

• The Mode buttons will blink RED if it does not find a valid code.

• If you do not find the TV code – repeat the steps.

(This is for use with an ATT UVERSE Remote but will work with other remotes using related buttons)

Skyworth TV 3 Digit Remote Control Codes
531
753
817

Skyworth TV 4 Digit Remote Control Codes
0696
0698
0727
0748
0753
0817
0037
0556
0009
0264

Skyworth TV 5 Digit Remote Control Codes
00753
00817
00037
00556
00009
00264

Symphonic TV 3 Digit Remote Control Codes
198
003
053
155
189

Symphonic TV 4 Digit Remote Control Codes
1280
1384
1483
1484
1024
1031
1036
1105

Symphonic DVD 4 Digit Remote Control Code
2321

Symphonic VCR 4 Digit Remote Control Code
3021
3002

Union TV 3 Digit Remote Control Codes
055
060
065
067
013
054
089

ON MOST REMOTES (Generalized):
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.