Kogan TV Universal Remote Codes

7890
0418
0641
0714
0726
0754
0779
0816
1190
2267
1404
0037
0587
0371
0218

What to do when Kogan TV Remote does not respond

Make sure that the batteries in your remote are properly inserted and have sufficient charge. Try replacing the batteries with fresh ones to see if that resolves the issue.

Check the remote for any debris or dirt that may be blocking the buttons. Clean the remote with a soft, dry cloth to remove any debris.

Sometimes, resetting the remote can fix any issues you may be experiencing. To do this, remove the batteries from the remote and press and hold any button for 15 seconds. Then, replace the batteries and try using the remote again.

If your Kogan TV has a Bluetooth remote, try re-pairing it with the TV. To do this, go to the TV settings and navigate to the Bluetooth settings. Select the remote and follow the on-screen instructions to re-pair it.

Troubleshooting Kogan TV

Check your TV is properly plugged into the power source and that the outlet is working. You can also try plugging in another device to ensure that the outlet is working correctly.

verify all the cables are securely connected to the TV and any other devices you may have connected to it, such as a cable box or gaming console.Make sure that your TV settings are properly configured. Check the picture and sound settings to make sure that they are set up correctly.

If none of the above steps work, try performing a factory reset of your TV. This will restore your TV to its original settings, which may resolve any issues you are experiencing.

Universal Remote Codes for TCL Roku TV

TCL TVs have become increasingly popular due to their affordability and advanced features. Programming a universal remote for a TCL TV is a simple process that allows you to control your TV with ease. There are two different methods for programming a universal remote, depending on the brand and model of your remote control. By following following basic steps and using the universal remote codes listed below, you can easily program your remote to work with your TCL TV.

ATT Uverse = 1346
Bright House Cable = 1756
Cablevision = 031
Charter = 11756
Comcast = 11756
Cox = 1756
DirecTV = 11756
Dish Network = 535
ONN = 3851
RCA = 11756
Time Warner = 387 or 1566
TIVO = 0091 or 0366
Verizon = 180

Here are some additional TLC TV codes -

• 11756
• 10818
• 12434
• 12290
• 12292
• 12187
• 11265
• 10154
• 10056
• 10047

If you own a Roku TCL Smart TV and a cable or satellite remote control, you can program the remote to work with your TV. This can be a convenient way to control your TCL Smart TV without having to use the multiple remotes. The process for programming the universal remote may vary depending on the specific remote control you have, but there are general steps you can follow to get started. By doing so, you can enjoy your favorite shows and movies with greater ease and convenience.

Controlling your TCL Roku TV with a cable, satellite, or universal remote is possible in many cases. Your provider may have a table of codes that you can use to program your remote to control certain functions of your TV. Look for your provider and the code that matches your remote in below list, and follow the instructions provided to program your remote. It's important to note that these codes come from TV remote cable providers and we carefully collect from companies to provide you. Not all buttons on your TCL Roku TV remote can be programmed to the buttons on your cable or satellite remote, and the level of button support may vary for specific remotes. 

Roku TCL TV Programming instructions

The process for programming a remote control for a TCL TV may vary depending on the model of your remote control. However, here are some general steps that you can follow:

1. Turn on your TCL TV.
2. Press and hold the "Setup" button on your remote until the button blinks twice.
3. Enter the four-digit code for TCL TVs. You can find a list of codes above.
4. Press the "Power" button on the remote. If the TV turns off, the programming is successful.
5. If the TV does not turn off, repeat steps 2-4 with another code until you find the correct one

If none of the codes work, you can try the auto-code search method:

1. Turn on your TCL TV.
2. Press and hold the "Setup" button on your remote until the button blinks twice.
3. Press the "TV" button on your remote.
4. Press and hold the "Setup" button again until the TV button blinks twice.
5. Press the "Power" button on the remote and then press "CH+" repeatedly until the TV turns off.
6. Press the "Setup" button again to save the code.