You are here

Home

TECHWOOD Remote Codes

VIZIO Universal Remote Setup codes for TECHWOOD TV (including LCD, LED and Plasma)
VIZIO Universal Remote Setup codes for TECHWOOD TV (including LCD, LED and Plasma)

Use the following directions to program your VIZIO Universal Remote Control to use with your TECHWOOD TV (including LCD, LED and Plasma) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0004 0009 0054 for your TECHWOOD TV (including LCD, LED and Plasma) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: TECHWOOD.

Device Type: TV (including LCD, LED and Plasma) .

Remote Code List:0004 0009 0054

VIZIO Universal Remote Setup codes for TECHWOOD DVD
VIZIO Universal Remote Setup codes for TECHWOOD DVD

Use the following directions to program your VIZIO Universal Remote Control to use with your TECHWOOD DVD device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0433 1071 0408 for your TECHWOOD DVD device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: TECHWOOD.

Device Type: DVD .

Remote Code List:0433 1071 0408

VIZIO Universal Remote Setup codes for TECHWOOD DVD/VCR Combos
VIZIO Universal Remote Setup codes for TECHWOOD DVD/VCR Combos

Use the following directions to program your VIZIO Universal Remote Control to use with your TECHWOOD DVD/VCR Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1071 for your TECHWOOD DVD/VCR Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: TECHWOOD.

Device Type: DVD/VCR Combos .

Remote Code List:1071

Subscribe to TECHWOOD Remote Codes