You are here

Home

SELECTRON Remote Codes

VIZIO Universal Remote Setup codes for SELECTRON TV (including LCD, LED and Plasma)
VIZIO Universal Remote Setup codes for SELECTRON TV (including LCD, LED and Plasma)

Use the following directions to program your VIZIO Universal Remote Control to use with your SELECTRON TV (including LCD, LED and Plasma) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1022 1020 1021 for your SELECTRON TV (including LCD, LED and Plasma) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: SELECTRON.

Device Type: TV (including LCD, LED and Plasma) .

Remote Code List:1022 1020 1021

VIZIO Universal Remote Setup codes for SELECTRON DVD
VIZIO Universal Remote Setup codes for SELECTRON DVD

Use the following directions to program your VIZIO Universal Remote Control to use with your SELECTRON DVD device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1077 1078 1079 1080 1081 1082 1083 for your SELECTRON DVD device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: SELECTRON.

Device Type: DVD .

Remote Code List:1077 1078 1079 1080 1081 1082 1083

VIZIO Universal Remote Setup codes for SELECTRON DVD Recorder
VIZIO Universal Remote Setup codes for SELECTRON DVD Recorder

Use the following directions to program your VIZIO Universal Remote Control to use with your SELECTRON DVD Recorder device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1080 for your SELECTRON DVD Recorder device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: SELECTRON.

Device Type: DVD Recorder .

Remote Code List:1080

Subscribe to SELECTRON Remote Codes