remote codes

Universal remote control codes to be used on SHARP TV’s

3 and 4 Digit Universal Remote Control Codes For Sharp TVs

Sharp TV Remote codes, use the below codes to control your Sharp TV with a universal remote.

How to setup Sharp TV Universal Remote with Code

Here’s the method that you can follow to program Sharp TV remote codes .

Upstar TV universal remote programming steps

1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

The following 5 digit codes will work with your Westinghouse TV

10178
10463
10885
10060
10889
11712
11661
10463
11928*
10890
11282
11577
11100
10080
10000
10111
11548
10623
10000*

Codes listed with an asterisk (*) are possible alternate codes for your TV. These alternate codes should operate the primary functions of your device in most cases (Power, Volume Up and Down, Mute).

 ADC 0531
Aiwa 1405, 0189, 0121, 1388, 1641
Alco 1390
AMC 1077
Amphion Media 1563
AMW 1563
Anam 1609
Apex Digital 1257, 1430, 1774
Arcam 1189, 0189
Audiotronic 1189
Audiovox 1390
Bose 1629, 1841, 1933
Boston Acoustics 2162
Capetronic 0531
Carver 1189, 0189, 0121
Coby 1389, 2127
Curtis-Mathes 1389
Daewoo 1250

ou can program your DIRECTV Universal Remote to control the following: TV, Audio components, Blu-ray player, DVD player, and VCR.

If you have an HD DVR or HD receiver, follow these steps:

control your TV, VCR or DVD, Cable or Satellite Receivers, Amplifier or Tuner, and Auxiliary devices.

PROGRAMMING A DEVICE

To program this remote to control home theater devices, follow the steps below.

Before proceeding, find the codes for the devices you want to program in “Manufacturer’s Codes” on the bottom of this page.

Cable Company = ATT Uverse
Remote Control Model Number = S10-S1
Remote Codes = 1346, 1097

Cable Company = Bright House Cable
Remote Control Model Number = URC1056
Remote Codes = 1756, 0818

You can try manually inputting the codes form your Chunghop Remote…

You can do a manual search or FULLY AUTOMATIC SEARCH of the codes using your Chunghop remote…

You can also do a point to point search of brand codes with your Chunghop universal remote…

Programming Instructions for the Universal Electronics COX URC 8820 Remote Control:

1. Search for your brand of TV from the list below…
2. Turn on the TV
3. Press the TV key and then let go off the TV key
4. Press and hold the MUTE and SELECT keys at the same time
5. Do this until the TV key blinks 2 times and then let go of both keys

1. Turn on a device.
2. On the remote control, press a device key once (e.g., AUX, VCR, or CABLE). Press and hold SETUP until the selected mode key flashes twice, then release SETUP.
3. ENTER the four digit code for your device found in the sidebar to the right. If performed correctly, the selected mode key will blink twice. If the selected mode key emits a long blink, the code is invalid.