Samsung Blu-Ray Player Universal Remote Codes (4 and 5 digit)

0199
12051
10812
10702
10060
20199
31868
10766
20573
11903
22069
11060
21075
20240
31295
31500
22329
22369
21470
22489
01877
21044
20820
10650
10814
22556
10178
20490
20045
01982
31304
20744

Samsung Blu-Ray Player Universal Remote Codes (4 and 5 digit)  programming the remote

Using the direct code entry method

1. Locate the Remote Code List provided above.

2. Manually turn on the device you wish to control.

3. Press and hold the SETUP button until the red indicator light stays on (approximately 2 seconds) and then release the SETUP button.

4. Press and release the desired device button on the remote (DVD/BLU-RAY). The red indicator will blink once and then remain on.

5.  Enter the first 4-digit OR 5-Digit code previously found in the code list using the number buttons on the remote. If the code entered is a valid code, the red indicator light will turn off. If the code entered is not a valid code, the red indicator light will flash and remain on allowing you to re-enter the code. If no buttons are pressed for 35 seconds, the remote will exit the SETUP mode and you will have to start over.

6. Point the remote at the device. Press the POWER button if the device turns off, no further programming is required for that device. If the device does not turn off, return to step 3 and use the next code found in the code list. Continue this process until a code for your device is found.