You are here

Home

QUASAR Remote Codes

VIZIO Universal Remote Setup codes for QUASAR TV (including LCD, LED and Plasma)
VIZIO Universal Remote Setup codes for QUASAR TV (including LCD, LED and Plasma)

Use the following directions to program your VIZIO Universal Remote Control to use with your QUASAR TV (including LCD, LED and Plasma) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0171 0148 0054 0170 0062 0374 0381 0003 0070 for your QUASAR TV (including LCD, LED and Plasma) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: QUASAR.

Device Type: TV (including LCD, LED and Plasma) .

Remote Code List:0171 0148 0054 0170 0062 0374 0381 0003 0070

VIZIO Universal Remote Setup codes for QUASAR Cable
VIZIO Universal Remote Setup codes for QUASAR Cable

Use the following directions to program your VIZIO Universal Remote Control to use with your QUASAR Cable device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0486 for your QUASAR Cable device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: QUASAR.

Device Type: Cable .

Remote Code List:0486

VIZIO Universal Remote Setup codes for QUASAR TV/VCR Combos
VIZIO Universal Remote Setup codes for QUASAR TV/VCR Combos

Use the following directions to program your VIZIO Universal Remote Control to use with your QUASAR TV/VCR Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0374 0381 for your QUASAR TV/VCR Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: QUASAR.

Device Type: TV/VCR Combos .

Remote Code List:0374 0381

Subscribe to QUASAR Remote Codes