Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS DVD device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1129 0966 0914 1127 1128 1126 0398 0408 0423 0755 0979 0981 0980 0456 0458 0969 1096 for your PHILIPS DVD device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS.

Device Type: DVD .

Remote Code List:1129 0966 0914 1127 1128 1126 0398 0408 0423 0755 0979 0981 0980 0456 0458 0969 1096

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS DVR (use code (A)(B) etc. if you have 2 or more of the same device) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0371(A) 0344(B) 0345(C) 0621 for your PHILIPS DVR (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS.

Device Type: DVR (use code (A)(B) etc. if you have 2 or more of the same device) .

Remote Code List:0371(A) 0344(B) 0345(C) 0621

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS DVD Recorder device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1096 1128 0979(A) 0980(B) for your PHILIPS DVD Recorder device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS.

Device Type: DVD Recorder .

Remote Code List:1096 1128 0979(A) 0980(B)

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS TV/VCR Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0288 0456 for your PHILIPS TV/VCR Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS.

Device Type: TV/VCR Combos .

Remote Code List:0288 0456

VIZIO Universal Remote Setup codes for PHILIPS TV/VCR/DVD Combos

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS TV/VCR/DVD Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0456 for your PHILIPS TV/VCR/DVD Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS.

Device Type: TV/VCR/DVD Combos .

Remote Code List:0456

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS DVD/VCR Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0456 [0969 & 0286] [0914 & 0286] for your PHILIPS DVD/VCR Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS.

Device Type: DVD/VCR Combos .

Remote Code List:0456 [0969 & 0286] [0914 & 0286]

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS DVR/DVD Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1128 for your PHILIPS DVR/DVD Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS.

Device Type: DVR/DVD Combos .

Remote Code List:1128

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS DVR/SAT Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0621 for your PHILIPS DVR/SAT Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS.

Device Type: DVR/SAT Combos .

Remote Code List:0621