Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS-MAGNAVOX Cable device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0505 0534 for your PHILIPS-MAGNAVOX Cable device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS-MAGNAVOX.

Device Type: Cable .

Remote Code List:0505 0534

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS-MAGNAVOX Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0576 0612 0639 for your PHILIPS-MAGNAVOX Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS-MAGNAVOX.

Device Type: Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) .

Remote Code List:0576 0612 0639

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS-MAGNAVOX DVD device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0398 0408 0423 0979 0980 for your PHILIPS-MAGNAVOX DVD device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS-MAGNAVOX.

Device Type: DVD .

Remote Code List:0398 0408 0423 0979 0980

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILIPS-MAGNAVOX DVD Recorder device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0979(A) 0980(B) for your PHILIPS-MAGNAVOX DVD Recorder device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

Brand: PHILIPS-MAGNAVOX.

Device Type: DVD Recorder .

Remote Code List:0979(A) 0980(B)