You are here

Home

PHILCO Remote Codes

VIZIO Universal Remote Setup codes for PHILCO TV (including LCD, LED and Plasma)
VIZIO Universal Remote Setup codes for PHILCO TV (including LCD, LED and Plasma)

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILCO TV (including LCD, LED and Plasma) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0062 0004 0005 0009 0183 0011 1158 0068 0075 0141 0003 0008 for your PHILCO TV (including LCD, LED and Plasma) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: PHILCO.

Device Type: TV (including LCD, LED and Plasma) .

Remote Code List:0062 0004 0005 0009 0183 0011 1158 0068 0075 0141 0003 0008

VIZIO Universal Remote Setup codes for PHILCO DVD
VIZIO Universal Remote Setup codes for PHILCO DVD

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILCO DVD device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 1392 for your PHILCO DVD device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: PHILCO.

Device Type: DVD .

Remote Code List:1392

VIZIO Universal Remote Setup codes for PHILCO DTV/ATSC Digital to Analog Converter
VIZIO Universal Remote Setup codes for PHILCO DTV/ATSC Digital to Analog Converter

Use the following directions to program your VIZIO Universal Remote Control to use with your PHILCO DTV/ATSC Digital to Analog Converter device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0581 for your PHILCO DTV/ATSC Digital to Analog Converter device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: PHILCO.

Device Type: DTV/ATSC Digital to Analog Converter .

Remote Code List:0581

Subscribe to PHILCO Remote Codes