You are here

HDMI

How To Setup Multiple Media Devices To A Television

How to connect multiple media devices to a TV
  1. Make sure your TV is OFF before you begin connecting any cables to it.
  2. Be sure you have all media components and the proper cables before you begin to connect anything to your flat screen Television.
  3. If you have a choice of which type of cables to use, always choose HDMI cables. (HDMI provides the best picture possible)
  4. Use a power strip with built in surge protectors to plug in all of your media devices. This is to protect all the electronic components if there is a power surge or lightning strike.
  5. Begin connecting one media device at a time.
  6. Connect the cable into the media device and the other end of the cable into the correct input on the TV. (Usually an HDMI port)
  7. Plug the media device into the surge protector power strip.
  8. Repeat this step until you have all media devices connected.
  9. Try to run the cables in the same area to keep them organized and hidden from view when you are watching TV.
  10. Once all of your media devices are connected, use cable ties to keep them all together and organized.
  11. If you choose, label each wire with what it is connected to, this way you will be able to easily know which cable is which.
  12. When all media devices are connected, get your TV remote and turn the TV on.
  13. Test each component with the remote control for that media device.
  14. Write down which media device is connected to which input so you know which input on the TV to change to when you are going to watch a DVD or connect to a ROKU for example.
  15. Some TV’s let you go into the MENU and label each input so you know which input is for what media component.

Connect cables for devices here – HDMI, COMPONENT, ANTENNA, CABLE

NOTE: If your television or other component is equipped with Red and White audio video jacks, it is a STEREO model and the cables should be connected as into the correct inputs. If your unit lacks a Red A/V jack, it is a MONO unit and you can simply disregard the Red cable and connections.


How To Connect a Blu-ray or DVD player to your TV


How to Connect an Antenna or Cable to Your HDTV


How to Connect ROKU to Your HDTV


How To Connect a Cable Box to your TV

Remote Control Codes For Avera TVs

Comcast: Use remote code 10030
AT&T (U-verse): Use remote code 1043
DirecTV: Use remote code 10030
RCA Universal remotes: Use remote code 0030
Dish Network Remote Controls: Use remote code 506Please use the above codes to program the remote control.

How to Program Avera TV Remote

  1. Switch on the TV
  2. Now go to the Component key on your remote which is usually located at the top of the remote.
  3. Press TV.
  4. Now it will ask to enter Avera TV remote codes. Enter the appropriate one from above list.
  5. Now its done. Please switch off using the remote and test all functions.
Subscribe to HDMI