You are here

Home

FORTEC STAR Remote Codes

VIZIO Universal Remote Setup codes for FORTEC STAR Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device)
VIZIO Universal Remote Setup codes for FORTEC STAR Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device)

Use the following directions to program your VIZIO Universal Remote Control to use with your FORTEC STAR Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0569 0555 0556 0557 0558 0559 for your FORTEC STAR Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: FORTEC STAR.

Device Type: Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) .

Remote Code List:0569 0555 0556 0557 0558 0559

VIZIO Universal Remote Setup codes for FORTEC STAR DVR (use code (A)(B) etc. if you have 2 or more of the same device)
VIZIO Universal Remote Setup codes for FORTEC STAR DVR (use code (A)(B) etc. if you have 2 or more of the same device)

Use the following directions to program your VIZIO Universal Remote Control to use with your FORTEC STAR DVR (use code (A)(B) etc. if you have 2 or more of the same device) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0569 0555 0556 for your FORTEC STAR DVR (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: FORTEC STAR.

Device Type: DVR (use code (A)(B) etc. if you have 2 or more of the same device) .

Remote Code List:0569 0555 0556

VIZIO Universal Remote Setup codes for FORTEC STAR DVR/SAT Combos
VIZIO Universal Remote Setup codes for FORTEC STAR DVR/SAT Combos

Use the following directions to program your VIZIO Universal Remote Control to use with your FORTEC STAR DVR/SAT Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0569 0555 0556 for your FORTEC STAR DVR/SAT Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: FORTEC STAR.

Device Type: DVR/SAT Combos .

Remote Code List:0569 0555 0556

Subscribe to FORTEC STAR Remote Codes