You are here

Home

ELECTROHOME Remote Codes

VIZIO Universal Remote Setup codes for ELECTROHOME TV (including LCD, LED and Plasma)
VIZIO Universal Remote Setup codes for ELECTROHOME TV (including LCD, LED and Plasma)

Use the following directions to program your VIZIO Universal Remote Control to use with your ELECTROHOME TV (including LCD, LED and Plasma) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0004 0009 0254 0003 0022 for your ELECTROHOME TV (including LCD, LED and Plasma) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: ELECTROHOME.

Device Type: TV (including LCD, LED and Plasma) .

Remote Code List:0004 0009 0254 0003 0022

VIZIO Universal Remote Setup codes for ELECTROHOME VCR
VIZIO Universal Remote Setup codes for ELECTROHOME VCR

Use the following directions to program your VIZIO Universal Remote Control to use with your ELECTROHOME VCR device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0245 0254 for your ELECTROHOME VCR device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: ELECTROHOME.

Device Type: VCR .

Remote Code List:0245 0254

VIZIO Universal Remote Setup codes for ELECTROHOME TV/VCR Combos
VIZIO Universal Remote Setup codes for ELECTROHOME TV/VCR Combos

Use the following directions to program your VIZIO Universal Remote Control to use with your ELECTROHOME TV/VCR Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0254 for your ELECTROHOME TV/VCR Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: ELECTROHOME.

Device Type: TV/VCR Combos .

Remote Code List:0254

Subscribe to ELECTROHOME Remote Codes