Newer codes 5 digit:

11886
10178
11687
12183

Cox Universal remote codes for Element TV

1687, 1886, 2183

Verizon universal remote codes for Element TV

3264

Comcast Xfinity remote codes for Element TV

13559, 11687, 12964, 12260, 13907,

11886, 11864, 12183, and 10178

Element TV Codes for RCA 3 in 1 Universal Remote

11687, 11886, 12183, 12964, 13559

Older codes 3 digit Codes to operate your Element TV:

046, 005, 028, 043, 
048, 076, 096, 155, 
004, 051, 127, 151, 
153, 154, 231, 236, 
238, 247, 252, 168, 
121

How to Program Universal remote control for Element TV

Before you begin programming universal remote control to control the Element TV make sure to plug all device. Check the battries in the universal remote are working. with out wasting any more time lets get to working.

Programming Instructions

Using the code(s) provided above, program the remote control directly using the following steps.

1. Enter Setup Mode

   Press and hold down the SETUP button on the remote until the red light on the remote turns on. Release the SETUP button. The red light will remain on.

   NOTE: The red light with either be a small light at the top of the remote or the power on/off button.

2. Press the device type button

   Press and release the device button on the remote for the type of device you wish to control. The red light will blink once and remain on.

   NOTE: If there is not a device button on the remote for your type of device, you can use any device button on the remote.

3. Enter the device code

   Use the number buttons on the remote to enter the codes shown above. The red light will turn off after entering the fourth digit.

4. Tests the results

   Point the remote at the device. Test the buttons on the remote to see if the device responds as you would expect. If the buttons do not operate the device, return to Step 1 above and use the next code in the list.

5. Repeat this process for your other devices

Your Element TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.

Complete list of codes for Magnavox Universal Remote Codes for TVs, DVD and audio video devices along with programming instruction to control all your devices.Magnavox Universal Remote Control Programming Codes are used to program your Magnavox remote or any universal remote to conrol your Television and audio video devices.

How to program Remote Control Codes For Magnavox TVs using most universal remote controls

Step 1:

Turn on the TV, Make sure battries are working in the remote.

Step 2:

Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.

Step 3:

 With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code,choose corresponding code from the list give below.

Step 4:

 Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.

Step 5:

Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Remote Control Codes For Magnavox TVs

view full universal remote code list for Magnavox universal remote

Magnavox TV Remote Control Codes

1053
1056
1057
1059
1060
1061
1083
1004
1007
1018
1047

Magnavox Sound Bar

32459

Magnavox DVD Remote Codes

2245
2293
2318
2320
2321
2327
2002
2018
2089
2237
2241

Magnavox HDTV Remote Codes

1372
1414
1329
1358

Magnavox VCR Remote Codes

3153
3183
3190
3206
3211
3016
3036
3051
3061
3128
3152

Complete list of codes for Magnavox Universal Remote Codes 

you can find the additional support information at Magnavox website.

Program Dish Remote to Work with Vizio TV:

1 – Point your Dish remote control at your Vizio TV
2 – Press and hold the TV button at the top of the Dish remote until all 4 mode buttons flash.
3 – Enter in the code 773 or 505 or 627 (whichever works on your Vizio model).
4 – Press the # button.
5 – The TV button will flash 3 times to tell you it worked.
6 – Test the volume or power button using the Dish remote.
7 – Your Vizio TV should now be controlled by your Dish remote.

Program your remote control to a BOSE Solo Sound Bar, use the following codes:
4001
5042
4017
1961
31629
31229
31841
30639
31253
30674

For programming with Uverse:
Press (at same time) ATT/OK – 955 – Enter
The volume control will then follow the mode button.

For programming with DirecTV:
Slide switch to AV1 or AV2
1. Press and hold MUTE and SELECT (LED flashes twice)
2. Enter the 4 or 5 digit code from above.
After each code, try using the VOL UP and see if VOL works.
If so, slide switch to AV1 or AV2
1. Press and hold MUTE and SELECT (LED flash 2x)
2. 993 then press SELECT
NOTE: Be sure your Bose is set to accept the IR codes.

(Confirmed: works with BOSE Solo Soundbar with SKY HD Rev9, DirecTV RC64, and Xfinity remotes)

To program your remote control to a INSIGNIA Sound Bar, use the following codes:
21268
12002
10463

If using Comcast remote and above codes do not work, try Code Search:
Turn on your sound bar.
Press Aux once on remote.
Then press and hold Setup until the key blinks 2x, then release Setup.
Enter 9 – 9 – 3.
The Aux key will blink 2x.
Press Power and aim the remote control at the sound bar and press CH + one or more times until the sound bar turns off.
Press Setup once to lock in the code.
The Aux key will blink twice.
To search for the codes of another device, repeat steps 1 to 5, but substitute the mode key for the device you are searching for.
SIDE NOTE: In search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.

(Confirmed: works with INSIGNIA Soundbar NS-SBAR-A, NS-SB314, SB212, with Comcast remotes)

To program your remote control to a SAMSUNG Sound Bar, use the following codes:
32609
22609
21014
20045

(Confirmed: works with Samsung Soundbar HW-FM55C, FM550, HW-HM45 and Xfinity remotes)

To program your remote control to a SONY Sound Bar, use the following codes:
1345
4029
31759

With Uverse remote try programming this method:
Program = press ATT/OK at same time – 955 – Enter.
In ATT mode set the STB sound to 15.
Set TV sound to a comfortable level
Set SONY soundbar sound to a comfortable level.

(Confirmed: works with SONY Soundbar HTCT260, CT770, CT-660, HTCT660 and Uverse remotes)

To program your remote control to an LG Sound Bar, use the following codes:
32676
11993
31953
31293

(Confirmed: works with LG Soundbar NB2022, NB3530A and Xfinity XR2 remote – Xfinity XR5 v4 remote)

To program your remote control to a VIZIO Sound Bar, use the following codes:
0883
0660
1517
1144
31517
11144
31975

Vizio Subwoofer volume control:
00105 Sub Down
00040 Sub Up

(Confirmed: works with VIZIO Soundbar VSB200, SB4020M-AO, SB15 2.1, VHT215, SB4021M-A1, VSB202, VSB210, VSB200-B)

Step-by-step for getting your Vizio Soundbar to work with the Comcast remote using EFC codes:
Aux – Setup (2 blinks) – 11144 (2 blinks)
Aux – Setup (2 blinks) – 994 – Setup – 001690 – Vol Up – 2 blinks
Aux – Setup (2 blinks) – 994 – Setup – 001680 – Vol Down – 2 blinks
Aux – Setup (2 blinks) – 994 – Setup – 000370 – Mute – 2 blinks
Aux – Setup (2 blinks) – 994 – Setup – 001650 – Power – 2 blinks
Aux – Setup (2 blinks) – 994 – Setup – 001640 – Input – 2 blinks

For Comcast remote, follow the Unlock/Lock directions using the 993 code to make the AUX Volume mode control the sound bar. 
Make sure you unlock the volume with the 993 code following the instructions.
The Comcast remote will then control the volume via the sound bar and not the TV.

To program your remote control to a SANYO Sound Bar, use the following codes:
20047
10154
10159
10051
10250

When connecting the Sound Bar, you can plug your soundbar directly into the Cable box, SAT box, or TV. Different programming methods may be needed depending on how your soundbar is connected.

Working Remote Control Codes For Panasonic TVs

Panasonic HDTV Codes :1140,1169,1170,1194,1233,1234,1331,1336,1410,1417,1442

Panasonic TV Codes: 1003,1010,1049,1053,1096,1123,1152,1231,1289,1292,1295

Panasonic DVD Codes : 2031,2066,2075,2076,2104,2105,2106,2111,2151,2153,2154

Panasonic Audio Codes : 4005,4018,4030,4038,4050,4051,4063,4050

Panasonic TV Remote Control app

Android and Apple store have below Apps to control  Panasoic TV. To use your mobile phone as remote control install the Panasoic App fro Google Play store if your using android phone. Incase you are using apple phone you need to install panasoic remote app from app store. 

How to Programming Panasonic TV

Note down the code for your TV from the remote control code list provided above. Make sure battries in universal remote code are working. 

Step 1

Turn on the Panasonic TV.

Step 2

Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.

Step 3 

With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.

Step 4 

Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.

Step 5

Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your Panasonic TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA,GE or any other universal remote.