Philips TV remote codes. If you have recently bought a universal remote control and you need the remote codes to operate your Philips TV, we have codes below for your TV that should be working. If the first does not work keep trying the numbers down the list.
ON MOST REMOTES: 1. Turn on the TV. 2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light. 3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code. 4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up. 5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.
How to Program Remote Control without Manual – FiOS TV Phillips
Your Philips TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.
Program your remote control to a BOSE Solo Sound Bar, use the following codes: 4001 5042 4017 1961 31629 31229 31841 30639 31253 30674
For programming with Uverse: Press (at same time) ATT/OK – 955 – Enter The volume control will then follow the mode button.
For programming with DirecTV: Slide switch to AV1 or AV2 1. Press and hold MUTE and SELECT (LED flashes twice) 2. Enter the 4 or 5 digit code from above. After each code, try using the VOL UP and see if VOL works. If so, slide switch to AV1 or AV2 1. Press and hold MUTE and SELECT (LED flash 2x) 2. 993 then press SELECT NOTE: Be sure your Bose is set to accept the IR codes.
(Confirmed: works with BOSE Solo Soundbar with SKY HD Rev9, DirecTV RC64, and Xfinity remotes)
To program your remote control to a INSIGNIA Sound Bar, use the following codes: 21268 12002 10463
If using Comcast remote and above codes do not work, try Code Search: Turn on your sound bar. Press Aux once on remote. Then press and hold Setup until the key blinks 2x, then release Setup. Enter 9 – 9 – 3. The Aux key will blink 2x. Press Power and aim the remote control at the sound bar and press CH + one or more times until the sound bar turns off. Press Setup once to lock in the code. The Aux key will blink twice. To search for the codes of another device, repeat steps 1 to 5, but substitute the mode key for the device you are searching for. SIDE NOTE: In search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first.
(Confirmed: works with INSIGNIA Soundbar NS-SBAR-A, NS-SB314, SB212, with Comcast remotes)
To program your remote control to a SAMSUNG Sound Bar, use the following codes: 32609 22609 21014 20045
(Confirmed: works with Samsung Soundbar HW-FM55C, FM550, HW-HM45 and Xfinity remotes)
To program your remote control to a SONY Sound Bar, use the following codes: 1345 4029 31759
With Uverse remote try programming this method: Program = press ATT/OK at same time – 955 – Enter. In ATT mode set the STB sound to 15. Set TV sound to a comfortable level Set SONY soundbar sound to a comfortable level.
(Confirmed: works with SONY Soundbar HTCT260, CT770, CT-660, HTCT660 and Uverse remotes)
To program your remote control to an LG Sound Bar, use the following codes: 32676 11993 31953 31293
(Confirmed: works with LG Soundbar NB2022, NB3530A and Xfinity XR2 remote – Xfinity XR5 v4 remote)
To program your remote control to a VIZIO Sound Bar, use the following codes: 0883 0660 1517 1144 31517 11144 31975
Vizio Subwoofer volume control: 00105 Sub Down 00040 Sub Up
(Confirmed: works with VIZIO Soundbar VSB200, SB4020M-AO, SB15 2.1, VHT215, SB4021M-A1, VSB202, VSB210, VSB200-B)
Step-by-step for getting your Vizio Soundbar to work with the Comcast remote using EFC codes: Aux – Setup (2 blinks) – 11144 (2 blinks) Aux – Setup (2 blinks) – 994 – Setup – 001690 – Vol Up – 2 blinks Aux – Setup (2 blinks) – 994 – Setup – 001680 – Vol Down – 2 blinks Aux – Setup (2 blinks) – 994 – Setup – 000370 – Mute – 2 blinks Aux – Setup (2 blinks) – 994 – Setup – 001650 – Power – 2 blinks Aux – Setup (2 blinks) – 994 – Setup – 001640 – Input – 2 blinks
For Comcast remote, follow the Unlock/Lock directions using the 993 code to make the AUX Volume mode control the sound bar. Make sure you unlock the volume with the 993 code following the instructions. The Comcast remote will then control the volume via the sound bar and not the TV.
To program your remote control to a SANYO Sound Bar, use the following codes: 20047 10154 10159 10051 10250
When connecting the Sound Bar, you can plug your soundbar directly into the Cable box, SAT box, or TV. Different programming methods may be needed depending on how your soundbar is connected.
2. Press and hold the "Setup" button until the status LED at the top of the remote changes from red to green.
3.Type in the 4-digit or 5-digit code listed below using the number buttons.
4. If the code is entered correctly, the status LED will flash green twice. If the status LED blinks red, then green the code was not entered correctly. Check that you are entering the correct code and try again.
5. Use the remote to operate your TV (use Power, VOL, etc.)
If these steps don't work, try another 4-digit or 5-digit code and repeat the above.
Element TV Remote Codes for XR11 Remote: 13559, 11687, 12964, 12260, 13907, 11886, 11864, 12183, and 10178.
LG TV Remote Codes for XR11 Remote: 12731, 10178, 10856, 10700, 10442, 10017, 12271, 11314, 11032, 11758, 12246, 10032, 11178, 11265, 11993, 11934, 11637, and 11530.
Panasonic TV Remote Codes for XR11 Remote: 11480, 10650, 10051, 11947, 11924, 11310, 10226, 10375, 11410, 11271, 12269, 11919, 11347, 11290, 10178, 10165, 10162, 10250, 11941, 11927, and 12273.
Samsung TV Remote Codes for XR11 Remote: 12051, 12280, 12281, 11903, 11060, 10587, 10329, 10482, 10650, 10814, 10032, 10178, 10030, 12284, 10812, 11632, 10702, 10060, 11959, and 10766.
Sony TV Remote Codes for XR11 Remote: 10810, 11100, 10834, 11685, 11791, 11786, 11400, 11925, 11904, 10011, 11317, and 10353.
VIZIO TV Remote Codes for XR11 Remote: 11758, 12707, 12512, 10864, 10885, 10178, 12247, and 11756.
Note: If you have a Samsung TV, the Samsung Soundbar should automatically PAIR to the TV and the Samsung TV remote should control the sound for both the TV and Soundbar. It connects wirelessly on some models.
Need more help programming your Universal or CAB SAT remote to your Samsung soundbar? Please leave your questions below and we will be happy to assist.
Android and Apple store have below Apps to control Panasoic TV. To use your mobile phone as remote control install the Panasoic App fro Google Play store if your using android phone. Incase you are using apple phone you need to install panasoic remote app from app store.
How to Programming Panasonic TV
Note down the code for your TV from the remote control code list provided above. Make sure battries in universal remote code are working.
Step 1
Turn on the Panasonic TV.
Step 2
Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
Step 3
With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
Step 4
Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
Step 5
Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.
Your Panasonic TV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA,GE or any other universal remote.
Here’s how to program your remote for control of a TV or TV and AVR
1.Install the remote control batteries and make sure your TV, AVR and set-top box or DTA are powered on.
2. Refer to the “Setup Codes for TVs” and “Setup Codes for AVRs and Soundbars” sections on the back of this guide to find the manufacturers of your TV and AVR.
3. Press and hold the Setup button on your remote until the status LED changes from red to green.
4. Enter the first code listed for the TV manufacturer. The status LED should flash green twice when the code is entered.
5. Press the TV Power button on the remote. If the TV turns off, you have successfully programmed your remote. Turn the TV back on and press the VOL +/- and Mute buttons to confirm they control the volume of your device.
6. If the TV does not turn off or the VOL +/- and Mute buttons do not work, repeat the steps above using the next code listed for your TV manufacturer.
Steps to program your remote for AVR (Home Theater/) control.
7. Press and hold the Setup button on your remote until the status LED changes from red to green.
8. Enter the first code listed for the AVR manufacturer.The status LED should flash green twice when the code is entered.
9. Press the All Power button on the remote. If the AVR turns off, you have successfully programmed your remote. Turn the AVR back on and press the VOL +/- and Mute buttons to confirm they control the volume of your device. If so, you’re all set!
10.If the AVR does not turn off or the VOL +/- and Mute buttons do not work, repeat the steps above using the next code listed for your AVR manufacturer.
Here’s how to program your remote for only AVR control:
1. Install the remote control batteries and make sure your AVR and set-top box or DTA are powered on.
2. Find the manufacturer of your AVR on the back of this guide. 3. Press and hold the Setup button on your remote until the status LED changes from red to green.
4. Enter the first code listed for the AVR manufacturer. The status LED should flash green twice when the code is entered.
5. Press the TV Power button on the remote. If the AVR turns off, you have successfully programmed your remote. Turn the AVR back on and press the VOL +/- and Mute buttons to confirm they control the volume of your device. If so, you’re all set!
6. If the AVR does not turn off or the VOL +/- and Mute buttons do not work, repeat the steps above using next code listed for the device manufacturer. You may need to try several codes to find the one that works for your device.
