Program Universal Remote CLIKR-5 UR5U-8780L & UR5U-8790L

Programming your CLIKR-5 universal remote with CLIKR-5Universal Remote Codes will allow you to operate multiple devices with one CLIKR-5 remote. Home entertainment devices such as TV, blu-ray, television, DVD player, VCR, stereo systems can be programmed with CLIKR-5 universal remote. you will need CLIKR-5 universal remote codes to program devices, we have listed CLIKR-5 3 digit universal remote codes.

How to program using Quick Setup Method

It’s easy to program the CLIKR-5 remote control to operate your TV. Simply press the number buttons 0 through 9 that your TV brand is assigned to using the following four steps.

STEP-1: Manually turn on the TV you wish to program.

STEP-2: Press and hold simultaneously for 3 seconds both the TV and A (Yellow) buttons or B (Blue) buttons, based on the column your TV brand is assigned to. The TV button LED light will turn on for 30 seconds confirming that you are in the program mode.

STEP-3: While the TV button LED is on, pointthe remote control at the TV and press the number button assigned to your TV brand as shown in the table (e.g. for Sharp TV, button 5 ). The TV should turn off. If it does not, press the same number button repeatedly until the TV turns off.

*Note : The remote will exit the programming mode automatically if it does not have matching codes and the LED will turn off.

STEP-4: Once the TV has turned off, press the TV button once again to save the code. The remote control is now ready to control your TV.

*Note : If the matching code could not be found in STEP3, use 3-Digit Code Method or Auto Search Method.

Quick Set-up Code Tables

TV : Televisions Quick Setup Codes

VCR : VCRs and TV/VCRs Quick Setup Codes

DVD: DVD Players

AUX: Audio Equipment, Media PC, etc.

Program CLIKR-5  universal remote with 3-Dight Code Method

STEP-1: Turn on the equipment that you want the remote control to operate (Cable Box, TV, VCR, DVD, etc.).

STEP-2: Press the [DEVICE] button and the [OK/SEL] button simultaneously for three seconds. The corresponding device LED will turn on indicating that it is ready to be programmed. The LED will remain on for 30 seconds. The next step must be entered while the LED is on.

STEP-3: Point the remote control toward the equipment and enter the three digit universal remote code number assigned to your brand from the code tables. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off.

*Note : You can verify that you have selected the correct code by pressing the [POWER] button. The equipment should turn back on. Then try all of the functions on the remote control (i.e. volume, mute, etc.) to ensure you have the correct code. If any of the functions do not operate as they should, repeat the instructions from STEP 3 above using the next three digit code number from the brand list.

STEP-4: Store the three-digit code by pressing the same [DEVICE] button once again. The device LED will blink twice to confirm that the code has been stored.

Universal remote Set-up Code Table for CLIKR-5 remote

Go back to Programming the Remote Control with codes

Go back to Programming the Remote Control with codes

Go back to Programming the Remote Control with codes

Go back to Programming the Remote Control with codes

Go back to Programming the Remote Control with codes

Go back to Programming the Remote Control with codes

Auto Search Method

If none of the three digit code numbers assigned to your brand of equipment works, or the code table does not list your brand, you can use the Auto Search Method to find the correct three-digit code number for your equipment by following steps:

STEP-1: Turn on the equipment that you wantthe remote control to operate (CableBox, TV, VCR, DVD, etc.).

STEP-2: Press the [DEVICE] button and the[OK/SEL] button simultaneously forthree seconds. The device LED willturn on indicating that it is ready to beprogrammed. The LED will remain onfor 30 seconds. The next step must beentered while the LED is on.

STEP-3: Press the [CH5] or [CH6] button one at a time or keep it pressed. The remote will emit a series of Power ON/OFF code signals. Release the [CH5] or [CH6] button as soon as the equipment turns off.

*Note : You can verify that you have selected the correct code by pressing the [POWER] button. The equipment should turn back on. Then try all of the functions on the remote control (i.e. volume, mute, etc.) to ensure you have the correct code. If any of the functions do not operate as they should, repeat the instructions from STEP 3 above to continue the Auto Search Method.

STEP-4: Press the same [DEVICE] button to store the code. The Device LED will blink twice to confirm that the code has been stored.

D. To Identify the 3-Digit Code Programmed for a Device

STEP-1: Press the appropriate [DEVICE] button and the [OK/SEL] button simultaneously for three seconds. The device LED will turn on for 30 seconds. The next step must be performed while the LED is on.

STEP-2: Press the [INFO] button. The device LEDwill blink a number of times indicatingthe number of each digit for the code.Each digit is separated by a one secondinterval of the LED being off.

Example : One blink, (pause) three blinks, (pause) eight blinks indicates the code number 138.

*Note : Ten blinks indicates the number 0.