You are here

Home

BELL EXPRESSVU Remote Codes

VIZIO Universal Remote Setup codes for BELL EXPRESSVU Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device)
VIZIO Universal Remote Setup codes for BELL EXPRESSVU Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device)

Use the following directions to program your VIZIO Universal Remote Control to use with your BELL EXPRESSVU Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0654 0647 0655 0628 for your BELL EXPRESSVU Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: BELL EXPRESSVU.

Device Type: Satellite (including Set-top Box, WebTV and DTV) (use code (A)(B) etc. if you have 2 or more of the same device) .

Remote Code List:0654 0647 0655 0628

VIZIO Universal Remote Setup codes for BELL EXPRESSVU DVR (use code (A)(B) etc. if you have 2 or more of the same device)
VIZIO Universal Remote Setup codes for BELL EXPRESSVU DVR (use code (A)(B) etc. if you have 2 or more of the same device)

Use the following directions to program your VIZIO Universal Remote Control to use with your BELL EXPRESSVU DVR (use code (A)(B) etc. if you have 2 or more of the same device) device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0647 0655 for your BELL EXPRESSVU DVR (use code (A)(B) etc. if you have 2 or more of the same device) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: BELL EXPRESSVU.

Device Type: DVR (use code (A)(B) etc. if you have 2 or more of the same device) .

Remote Code List:0647 0655

VIZIO Universal Remote Setup codes for BELL EXPRESSVU DVR/SAT Combos
VIZIO Universal Remote Setup codes for BELL EXPRESSVU DVR/SAT Combos

Use the following directions to program your VIZIO Universal Remote Control to use with your BELL EXPRESSVU DVR/SAT Combos device.

1. Manually turn on your TV (or device you want to control)

2. Press the TV (or device) button and hold for 5 seconds until the LED flashes twice. LED will remain lit.

3. Enter one of the programming code from the list 0647 0655 for your BELL EXPRESSVU DVR/SAT Combos device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off. 

4. Point the VIZIO remote control at the device and press the POWER button. If the device powers off, setup is complete. If not, repeat steps with a different code.

 

Brand: BELL EXPRESSVU.

Device Type: DVR/SAT Combos .

Remote Code List:0647 0655

Subscribe to BELL EXPRESSVU Remote Codes