You are here

Home

4 digit

Universal Logitech Harmony 650 Programmable Infrared All in One Remote Control codes

Logitech Harmony 650 Infrared All in One Remote Control, Universal Remote Logitech, Programmable Remote Codes

Here is the method for the step by step way to configure your Logitech Universal Remote

You can add codes to your Logitech remote with the remote control application from Logitech. You need to first download the software from the Logitech website. These codes are generated in collaboration between Beyond Platinum and Logitech. Go to the website My Harmony and set up your remote using the database. Harmony support page is here and the Harmony database compatibility page is here.

Steps to get components working on your Harmony remote
With the Logitech remote control app that is connected to the internet:
(Below is an example of how the setup procedure works)

1. Select “ADD DEVICE”
2. Under “DEVICES” select “SATELLITE”
3. Under “MANUFACTURER” select “BEYOND PLATINUM”
4. Under “MODEL” type the words “Explora MODE1” or “Explora MODE2” (DO NOT type the inverted commas but be sure to type the words Explora MODE1 or Explora MODE2 exactly as shown)
5. Test to be sure your remote is now working

Download Logitech Remote 650 Manual

Remote Control Codes For Daewoo TVs

Daewoo TV 4 Digit Remote Control Codes:
0905
0615
0505
0826
0529
0046
0614
0002
0502
0611
0102
0415

Daewoo TV 3 Digit Remote Control Codes:
039
016
092
091
004
005
006
016
017
018
127
171
102
110
214
303
311
314
403
407
415
502

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3 or 4 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3 or 4 digit code. The button will blink twice to confirm the code is stored.

Your Daewoo TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.

Remote Control Codes For Kogan TVs

Kogan TV Universal Remote Codes


7890
0418
0641
0714
0726
0754
0779
0816
1190
2267
1404
0037
0587
0371
0218

What to do when Kogan TV Remote does not respond

Make sure that the batteries in your remote are properly inserted and have sufficient charge. Try replacing the batteries with fresh ones to see if that resolves the issue.

Check the remote for any debris or dirt that may be blocking the buttons. Clean the remote with a soft, dry cloth to remove any debris.

Sometimes, resetting the remote can fix any issues you may be experiencing. To do this, remove the batteries from the remote and press and hold any button for 15 seconds. Then, replace the batteries and try using the remote again.

If your Kogan TV has a Bluetooth remote, try re-pairing it with the TV. To do this, go to the TV settings and navigate to the Bluetooth settings. Select the remote and follow the on-screen instructions to re-pair it.

Troubleshooting Kogan TV

Check your TV is properly plugged into the power source and that the outlet is working. You can also try plugging in another device to ensure that the outlet is working correctly.

verify all the cables are securely connected to the TV and any other devices you may have connected to it, such as a cable box or gaming console.Make sure that your TV settings are properly configured. Check the picture and sound settings to make sure that they are set up correctly.

If none of the above steps work, try performing a factory reset of your TV. This will restore your TV to its original settings, which may resolve any issues you are experiencing.


 

Remote Control Codes For Proscan TVs

Universal remote control codes for Proscan TV

Proscan HDTV Codes = 1000

Proscan TV Codes = 1000, 1008, 1068, 1094, 1108

Proscan DVD Codes = 2118, 2144, 2205, 2319

Proscan VCR Codes = 3000

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3, 4, or 5 digit code. The button will blink twice to confirm the code is stored.

Your ProscanTV can be controlled with a universal remote and work with Comcast, Dish Network, Direct TV, RCA, etc…

Remote Control Codes For Sharp TVs

Universal remote control codes to be used on SHARP TV’s
3 and 4 Digit Universal Remote Control Codes For Sharp TVs

Sharp TV remote control codes

Sharp TV Remote codes, use the below codes to control your Sharp TV with a universal remote.

Universal remote control codes for Sharp TV

Sharp TV Remote Codes

Use below sharp TV remote codes list to setup your universal remote. You can control all your devices by programming the sharp tv remote codes.

The 3 digit codes for most programmable universal remote controls for Sharp televisions are:

  • 002
  • 013
  • 014
  • 111
  • 502
  • 509
  • 712
  • 812
  • 813
  • 913
  • 918

NOTE: Codes to operate televisions using a Sharp brand universal remote control will be 2 digits long. They will go from 01 to 18.

The 4 digit codes for most programmable universal remote controls for Sharp televisions are:

  • 0039
  • 0093
  • 0165
  • 0386
  • 1004
  • 1009
  • 1011
  • 1025
  • 1064
  • 1077
  • 1078
  • 1081
  • 1097
  • 1099
  • 1153
  • 1157
  • 1274
  • 1298
  • 1311
  • 1312
  • 1362
  • 1375
  • 1378

How to setup Sharp TV Universal Remote with Code

Here’s the method that you can follow to program Sharp TV remote codes .

  1. Keep the TV connected to its power source, but at the same time ensure that the TV is switched off.
  2. Press and hold the setup button until the red power button light turns on.
  3. Now press the TV button.
  4. Now, you need to enter the corresponding device’s code.
  5. Once you have neutered the correct code, press the power button on the remote to switch your TV on.
  6. If your TV switches on, the code has been correctly entered. If not, make sure to try other combinations of the code for your particular TV brand.

 

Remote Control Codes For Goldstar TVs

Goldstar TV Remote Codes:
0003
0004
0043
0080
0153
0172
0252
0269
0270
0280
0299
0333
0393
0395
0399
0400
0476
0477
0481
0482
0486
0498
0501
0513
0518
0528
0544
0579
0581
0590
0592
0599
0600
0624
0641
0663
0673
0677
0678
0694
0697
0752
0794
0409
0410
0414

Remote Control Codes For JVC TVs

JVC 3 Digit HDTV Remote Codes
065
067
089
013
054
055
060

JVC 4 Digit HDTV Remote Codes
1227
1130
1131

JVC 4 Digit TV Remote Codes
1080
1092
1117
1131
1235
1288
1299
1011
1012
1026
1049
1052
1054
1055

JVC 4 Digit DVD Remote Codes
2097
2115
2166
2204
2206
2017
2028
2047
2090
2096
2217

JVC 4 Digit VCR Remote Codes
3060
3067
3118
3121
3122
3123
3005
3006
3007
3014
3055

Programming Sansui TVs using Universal Remote Codes

Universal remote control codes for Sansui TV

The codes for a universal remote to work with a Sansui television are:
Sansui television remote code 834
Sansui television remote code 0310
Sansui television remote code 0394
Sansui television remote code 20695

These codes are compatible with Universal remotes and Sansui televisions that have a functioning infrared device.

How to use a dish network remote control to use a Sansui TV:
1-Point the dish remote at the tv.
2-Press and hold the tv button at the top till all 4 lights lite up.
3-Press the red power button at the top once.
4-Press the channel up button slowly till the tv turns off.
5-Press the pound button once.
6-Go back to the top and press the big red power button 3 to 5 times.

OPPO Blu Ray Remote Control Codes

OPPO BLU-RAY Player 5 Digit Universal Remote Codes

20575
21525
20503
20695
21045
21154
21503
21769

OPPO BLU-RAY Player 4 Digit Universal Remote Codes

0503
0575
1525
0503
0695
1045
1154
1503
1769

How To Program A COX Remote Control
  1. Turn on a device.
  2. On the remote control, press a device key once (e.g., AUX, VCR, or CABLE). Press and hold SETUP until the selected mode key flashes twice, then release SETUP.
  3. ENTER the four digit code for your device found in the sidebar to the right. If performed correctly, the selected mode key will blink twice. If the selected mode key emits a long blink, the code is invalid. Repeat steps 2 through 3 and try entering the same code again.
  4. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2-3, trying each code for your brand until you find one that works. If it still does not work, try searching for the code.
  5. Repeat steps 1-4 for each device you want the remote control to control. For future reference, write down each working device code.

Pages

Subscribe to 4 digit