Aiwa TV 3 digit remote codes

109
192
402
185
037
064
039

TO USE THE AIWA CODES WITH YOUR REMOTE – FOLLOW THE GENERAL INSTRUCTIONS BELOW:
1-Press and hold the clear TV button at the top until all 4 lights illuminate.
2-Select the code.
3-Press the pound button 1 time.
4-Go to the top and press the red power button until the TV turns off.

Daewoo TV 4 Digit Remote Control Codes:
0905
0615
0505
0826
0529
0046
0614
0002
0502
0611
0102
0415

Daewoo TV 3 Digit Remote Control Codes:
039
016
092
091
004
005
006
016
017
018
127
171
102
110
214
303
311
314
403
407
415
502

ON MOST REMOTES:
1. Turn on the TV.
2. Press and hold the TV and SEL buttons simultaneously for 3 seconds. The button will light.
3. With the button lit, point the remote at the TV and enter the TV’s 3 or 4 digit code.
4. Verify by pressing the VOLUME + button. This should turn the TV VOLUME up.
5. Press the TV button to store the 3 or 4 digit code. The button will blink twice to confirm the code is stored.

Your Daewoo TV can be controlled with a universal remote and work with RCA remotes, Comcast, DirecTV, Charter, and more.

Universal remote control codes to be used on SHARP TV’s
3 and 4 Digit Universal Remote Control Codes For Sharp TVs

Sharp TV remote control codes

Sharp TV Remote codes, use the below codes to control your Sharp TV with a universal remote.

Sharp TV Remote Codes

Use below sharp TV remote codes list to setup your universal remote. You can control all your devices by programming the sharp tv remote codes.

The 3 digit codes for most programmable universal remote controls for Sharp televisions are:

• 002
• 013
• 014
• 111
• 502
• 509
• 712
• 812
• 813
• 913
• 918

NOTE: Codes to operate televisions using a Sharp brand universal remote control will be 2 digits long. They will go from 01 to 18.

The 4 digit codes for most programmable universal remote controls for Sharp televisions are:

• 0039
• 0093
• 0165
• 0386
• 1004
• 1009
• 1011
• 1025
• 1064
• 1077
• 1078
• 1081
• 1097
• 1099
• 1153
• 1157
• 1274
• 1298
• 1311
• 1312
• 1362
• 1375
• 1378

How to setup Sharp TV Universal Remote with Code

Here’s the method that you can follow to program Sharp TV remote codes .

1. Keep the TV connected to its power source, but at the same time ensure that the TV is switched off.
2. Press and hold the setup button until the red power button light turns on.
3. Now press the TV button.
4. Now, you need to enter the corresponding device’s code.
5. Once you have neutered the correct code, press the power button on the remote to switch your TV on.
6. If your TV switches on, the code has been correctly entered. If not, make sure to try other combinations of the code for your particular TV brand.

JVC 3 Digit HDTV Remote Codes
065
067
089
013
054
055
060

JVC 4 Digit HDTV Remote Codes
1227
1130
1131

JVC 4 Digit TV Remote Codes
1080
1092
1117
1131
1235
1288
1299
1011
1012
1026
1049
1052
1054
1055

JVC 4 Digit DVD Remote Codes
2097
2115
2166
2204
2206
2017
2028
2047
2090
2096
2217

JVC 4 Digit VCR Remote Codes
3060
3067
3118
3121
3122
3123
3005
3006
3007
3014
3055

The codes for a universal remote to work with a Sansui television are:
Sansui television remote code 834
Sansui television remote code 0310
Sansui television remote code 0394
Sansui television remote code 20695

These codes are compatible with Universal remotes and Sansui televisions that have a functioning infrared device.

How to use a dish network remote control to use a Sansui TV:
1-Point the dish remote at the tv.
2-Press and hold the tv button at the top till all 4 lights lite up.
3-Press the red power button at the top once.
4-Press the channel up button slowly till the tv turns off.
5-Press the pound button once.
6-Go back to the top and press the big red power button 3 to 5 times.

JVC 3 Digit HDTV Remote Codes
065
067
089
013
054
055
060

JVC 4 Digit HDTV Remote Codes
1227
1130
1131

JVC 4 Digit TV Remote Codes
1080
1092
1117
1131
1235
1288
1299
1011
1012
1026
1049
1052
1054
1055

JVC 4 Digit DVD Remote Codes
2097
2115
2166
2204
2206
2017
2028
2047
2090
2096
2217

JVC 4 Digit VCR Remote Codes
3060
3067
3118
3121
3122
3123
3005
3006
3007
3014
3055

ony Blu-ray Disc Player Universal 3 Digit Codes

617
644
645
670
671
729
730
731
768

Sony Blu-ray Disc Player Universal 4 Digit Codes

2484
1516
2014
2020
2022
2065

2103
2108
2113
2162
2171
2176
2189
2203
2226
2238
2244
2251
2257
2273
2278
2296
2298
2305
2306
2307
2309
2313
2329
2332
2338
2355
2405
2406
2407

Sony Blu-ray Disc Player Universal 5 Digit Codes

11516
41516
42178
42180

Program your universal remote control to a SONY Sound Bar. Use the following 4 and 5 digit remote codes.

SONY Sound Bar 4 Digit Remote Control Codes:

4029

SONY Sound Bar 5 Digit Remote Control Codes:

31759

32172

30766

All codes reported working with the SONY Soundbar HT-CT60, HT-CT260, Sony STR-K700, Sony HTCT260, HTCT660, Sony CT-660, Sony CT770, SA-CT60, HT-CT260H, and HT CT150.

These codes have been tested with the Comcast remote controls, U-verse remote, S10-S4, HR24-500, RC65RX.

Using a Comcast Remote?

Press AUX, Code 31759, and POWER or -> PLAY

Using ATT U-Verse Remote?

ATT/OK – 955 – ENTER (Will change to volume follows mode button)

ATT/OK – 955 – AUX – ENTER (Will change to ALWAYS control Sony)

What about power ON OFF?

ATT/OK – 977 – ATT – TV – AUX – ENTER (Will add aux to power sequence)

Note that ENTER is on bottom right (Not the OK button)

Program – ATT/OK – 955 – ENTER.